PartDesign AdditiveBox/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/ru |Name=PartDesign AdditiveBox |Name/ru=PartDesign AdditiveBox |Workbenches=PartDesign |MenuLocation=Part Design → Create an additi...")
(Created page with "==Описание==")
Line 18: Line 18:
}}
}}


==Описание==
==Description==


Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).
Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).

Revision as of 18:54, 16 October 2020

PartDesign AdditiveBox

Системное название
PartDesign AdditiveBox
Расположение в меню
Part Design → Create an additive primitive → Additive Box
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
PartDesign Primitive additive

Описание

Inserts a primitive box in the active Body as the first feature, or fuses it to the existing feature(s).

Usage

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Options

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part Attachment.
  • ДанныеLabel: Label given to the Box object. Change to suit your needs.
  • ДанныеLength: the Box's dimension in the X-direction.
  • ДанныеWidth: the Box's dimension in the Y-direction.
  • ДанныеHeight: the Box's dimension in the Z-direction.