Manual:Import and export to other filetypes/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "FreeCAD poate importa și exporta multe tipuri de fișiere. Iată o listă cu cele mai importante, cu o scurtă descriere a caracteristicilor disponibile:")
No edit summary
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{Docnav/ro
|[[Manual:Parametric objects/ro|Parametric objects]]
|[[Manual:All workbenches at a glance/ro|All workbenches at a glance]]
|[[Manual:Introduction/ro|Manual start]]
|IconC = Crystal Clear manual.png
}}

{{Manual:TOC}}
{{Manual:TOC}}


FreeCAD poate importa și exporta multe tipuri de fișiere. Iată o listă cu cele mai importante, cu o scurtă descriere a caracteristicilor disponibile:
FreeCAD poate importa și exporta multe tipuri de fișiere. Iată o listă cu cele mai importante, cu o scurtă descriere a caracteristicilor disponibile:


<div class="mw-translate-fuzzy">
{| class="wikitable" style="width:100%"
{| class="wikitable" style="width:100%"
! Format
! Format
Line 13: Line 22:
| Yes
| Yes
| Yes
| Yes
| This is the most faithful import/export format available, since it supports solid geometry and NURBS. Use it whenever it is possible.
|Acesta este cel mai fidel format import / export disponibil, deoarece susține geometria solidă și NURBS. Utilizați-l ori de câte ori este posibil.
|-
|-
| IGES
| IGES
| Yes
| Yes
| Yes
| Yes
| An older solid format, also very well supported. Some older applications don't support STEP but have IGES.
| Un format solid mai vechi, de asemenea foarte bine susținut. Unele aplicații mai vechi nu acceptă PAS, dar au IGES.
|-
|-
| BREP
| BREP
| Yes
| Yes
| Yes
| Yes
| The native format of [https://en.wikipedia.org/wiki/Open_Cascade_Technology OpenCasCade], FreeCAD's geometry kernel.
| Formatul nativ al Open Cascade Technology [https://en.wikipedia.org/wiki/Open_Cascade_Technology OpenCasCade], FreeCAD's geometry kernel.
|-
|-
| DXF
| DXF
| Yes
| Yes
| Yes
| Yes
| An open format maintained by Autodesk. Since the 3D data inside a DXF file is encoded in proprietary format, FreeCAD can only import/export 2D data to/from this format.
| Un format deschis întreținut de Autodesk. Deoarece datele 3D din interiorul unui fișier DXF sunt codificate în format propriu, FreeCAD poate importa / exporta date 2D în / din acest format.
|-
|-
| DWG
| DWG
| Yes
| Yes
| Yes
| Yes
| The proprietary version of DXF. Requires the installation of the [https://www.opendesign.com/guestfiles Teigha File Converter] utility. This format suffers from the same limitations as DXF.
| Versiunea proprietară a DXF. Necesită instalarea [https://www.opendesign.com/guestfiles Teigha File Converter] utility. Acest format suferă de aceleași limitări ca și DXF.
|-
|-
| OBJ
| OBJ
| Yes
| Yes
| Yes
| Yes
| Un format bazat pe plasă. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export. Un exportator alternativ este furnizat de atelierul de lucru Arch, mai potrivit exportului de modele arhitecturale.
| A mesh-based format. Can only contain triangulated meshes. All solid and NURBS-based objects of FreeCAD will be converted to mesh on export. An alternative exporter is provided by the Arch workbench, more suited to the export of architectural models.
|-
|-
| DAE
| DAE
| Yes
| Yes
| Yes
| Yes
| The main import/export format of Sketchup. Can only contain triangulated meshes. All solid and NURBS-based objects of FreeCAD will be converted to mesh on export.
| Principalul format import / export al lui Sketchup. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
|-
|-
| STL
| STL
| Yes
| Yes
| Yes
| Yes
| A mesh-based format, commonly used for 3D printing. Can only contain triangulated meshes. All solid and NURBS-based objects of FreeCAD will be converted to mesh on export.
| Un format bazat pe plasă, utilizat în mod obișnuit pentru imprimarea 3D. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
|-
|-
| PLY
| PLY
| Yes
| Yes
| Yes
| Yes
| Un format mai vechi bazat pe plasă. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
| An older mesh-based format. Can only contain triangulated meshes. All solid and NURBS-based objects of FreeCAD will be converted to mesh on export.
|-
|-
| IFC
| IFC
| Yes
| Yes
| Yes
| Yes
| [https://en.wikipedia.org/wiki/Industry_Foundation_Classes Industry Foundation Classes]. Requires the installation of [http://ifcopenshell.org/python.html IfcOpenShell-python]. The IFC format and its compatibility with other applications is a complex affair, use with care.
| [https://en.wikipedia.org/wiki/Industry_Foundation_Classes Industry Foundation Classes]. Necesită instalarea a [http://ifcopenshell.org/python.html IfcOpenShell-python]. Formatul IFC și compatibilitatea acestuia cu alte aplicații este o afacere complexă, a se utiliza cu atenție.
|-
|-
| SVG
| SVG
| Yes
| Yes
| Yes
| Yes
| An excellent, widespread 2D graphics format
| Un excelent, larg răspândit format pentru grafică 2D
|-
|-
| VRML
| VRML
| Yes
| Yes
| Yes
| Yes
| Un format web vechi bazat pe plasă.
| A rather old mesh-based web format.
|-
|-
| GCODE
| GCODE
| Yes
| Yes
| Yes
| Yes
| FreeCAD can already import and export to/from several flavors of GCode, but only a small number of machines is supported at the moment.
| FreeCAD poate deja importe și să exporte în / de la mai multe dialecte GCode, dar în acest moment este suportat doar un număr mic de mașini.
|-
|-
| CSG
| CSG
Line 80: Line 89:
| OpenSCAD's [https://en.wikipedia.org/wiki/Constructive_solid_geometry CSG] (Constructive Solid Geometry) format.
| OpenSCAD's [https://en.wikipedia.org/wiki/Constructive_solid_geometry CSG] (Constructive Solid Geometry) format.
|}
|}
</div>


<div class="mw-translate-fuzzy">
Some of these file formats have options. These can be configured from menu '''Edit -> Preferences -> Import/export:'''
Unele dintre aceste formate de fișiere au opțiuni. Acestea pot fi configurate din meniu '''Edit -> Preferences -> Import/export:'''
</div>


[[Image:Import_preferences.jpg]]
[[Image:Import_preferences.jpg]]


'''Read more'''
'''De citit în plus'''


<div class="mw-translate-fuzzy">
* [[Import_Export|All file formats supported by FreeCAD]]
* [[Import_Export|All file formats supported by FreeCAD]]
* [[Draft_DXF|Working with DXF files in FreeCAD]]:
* [[Draft_DXF|Working with DXF files in FreeCAD]]:
* [[Dxf_Importer_Install|Enabling DXF and DWG support]]
* [[Draft_SVG|Working with SVG files in FreeCAD]]
* [[Draft_SVG|Working with SVG files in FreeCAD]]
* [[Arch_IFC|Importing and exporting to IFC]]
* [[Arch_IFC|Importing and exporting to IFC]]
Line 96: Line 108:
* [http://www.buildingsmart-tech.org/ifc/IFC4/final/html/index.htm The IFC format]
* [http://www.buildingsmart-tech.org/ifc/IFC4/final/html/index.htm The IFC format]
* [http://ifcopenshell.org/ IfcOpenShell]
* [http://ifcopenshell.org/ IfcOpenShell]
</div>


{{Docnav/ro
|[[Manual:Parametric objects/ro|Parametric objects]]
|[[Manual:All workbenches at a glance/ro|All workbenches at a glance]]
|[[Manual:Introduction/ro|Manual start]]
|IconC = Crystal Clear manual.png
}}

[[Category:Poweruser Documentation{{#translation:}}]]
[[Category:Tutorials{{#translation:}}]]

Latest revision as of 20:04, 22 November 2023

FreeCAD poate importa și exporta multe tipuri de fișiere. Iată o listă cu cele mai importante, cu o scurtă descriere a caracteristicilor disponibile:

Format Import Export Notes
STEP Yes Yes Acesta este cel mai fidel format import / export disponibil, deoarece susține geometria solidă și NURBS. Utilizați-l ori de câte ori este posibil.
IGES Yes Yes Un format solid mai vechi, de asemenea foarte bine susținut. Unele aplicații mai vechi nu acceptă PAS, dar au IGES.
BREP Yes Yes Formatul nativ al Open Cascade Technology OpenCasCade, FreeCAD's geometry kernel.
DXF Yes Yes Un format deschis întreținut de Autodesk. Deoarece datele 3D din interiorul unui fișier DXF sunt codificate în format propriu, FreeCAD poate importa / exporta date 2D în / din acest format.
DWG Yes Yes Versiunea proprietară a DXF. Necesită instalarea Teigha File Converter utility. Acest format suferă de aceleași limitări ca și DXF.
OBJ Yes Yes Un format bazat pe plasă. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export. Un exportator alternativ este furnizat de atelierul de lucru Arch, mai potrivit exportului de modele arhitecturale.
DAE Yes Yes Principalul format import / export al lui Sketchup. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
STL Yes Yes Un format bazat pe plasă, utilizat în mod obișnuit pentru imprimarea 3D. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
PLY Yes Yes Un format mai vechi bazat pe plasă. Poate conține numai ochiuri triunghiulare. Toate obiectele solide și bazate pe NURBS ale FreeCAD vor fi convertite în plasă la export.
IFC Yes Yes Industry Foundation Classes. Necesită instalarea a IfcOpenShell-python. Formatul IFC și compatibilitatea acestuia cu alte aplicații este o afacere complexă, a se utiliza cu atenție.
SVG Yes Yes Un excelent, larg răspândit format pentru grafică 2D
VRML Yes Yes Un format web vechi bazat pe plasă.
GCODE Yes Yes FreeCAD poate deja să importe și să exporte în / de la mai multe dialecte GCode, dar în acest moment este suportat doar un număr mic de mașini.
CSG Yes No OpenSCAD's CSG (Constructive Solid Geometry) format.

Unele dintre aceste formate de fișiere au opțiuni. Acestea pot fi configurate din meniu Edit -> Preferences -> Import/export:

De citit în plus