Ottimizzare l'installazione
Introduction
Per impostare e manipolare la tabella dei parametri di FreeCAD normalmente si usa l'editor delle preferenze nel menu Modifica → Preferenze.
Tuttavia, è anche possibile accedere, modificare e creare i parametri manualmente, usando l'editore dei parametri che si trova nel menu Strumenti → Modifica parametri.
L'elenco seguente mostra i parametri che non sono accessibili tramite l'editor delle preferenze, ma che è anche possibile impostare manualmente:
General
- Mod/Part/ParametricRefine (boolean) : impostare su
false
in modo che Affina una forma crei una copia indipendente anziché una copia collegata. L'impostazione predefinita ètrue
se il valore non esiste. - Mod/PartDesign/SwitchToTask (boolean): impostare su
false
per impedire a PartDesign di passare al pannello Azioni all'avvio. L'impostazione predefinita ètrue
se il valore non esiste. - Mod/PartDesign/SwitchToWB (boolean): impostare su
false
per impedire che PartDesign venga chiamato automaticamente quando viene attivato un Corpo di PartDesign. L'impostazione predefinita ètrue
se il valore non esiste. - Document/SaveThumbnailFix (boolean): impostare su
true
per risolvere un problema con Qt5 che impedisce la generazione delle miniature dei file.FCStd
. - TechDraw ha diverse opzioni nascost e documentate nelle preferenze di TechDraw.
- View/SavePicture (string): impostare su FramebufferObject, PixelBuffer o CoinOffscreenRenderer per i metodi diversi per produrre immagini dalla vista 3D
- View/NaviStepByTurn (integer) : Definisce il numero di passaggi incrementali (tacche) per completare un giro quando si utilizzano le frecce di NaviCube. Se il valore non è definito, il valore predefinito è 8, il che significa che ogni incremento ruota di 360/8 = 45 gradi.
- View/NavigationDebug (boolean) : abilita l'output di debug degli stili di navigazione (a partire dalla v0.19, riguarda solo lo stile di navigazione gestuale).
- View/GestureRollFwdCommand, View/GestureRollBackCommand (string) : comandi da eseguire con i gesti di scorrimento del pulsante del mouse nello stile di navigazione gestuale.
- View/GestureMoveThreshold (integer) : la distanza (px) che il cursore del mouse deve spostarsi per passare alle modalità di rotazione o panoramica nello stile di navigazione gestuale. L'impostazione predefinita è 5.
- View/GestureTapHoldTimeout (integer) : imposta il tempo di attesa (in millisecondi) per entrare in modalità panoramica nello stile di navigazione gestuale. Può essere utile aumentarlo se il trascinamento della geometria nello sketcher è difficile. L'impostazione predefinita è 700.
- Mod/Draft/defaultCameraHeight (int) : imposta l'altezza della videocamera all'avvio di Draft in un documento vuoto. 0 disabilita, l'impostazione di default è 5, buona quando si lavora in millimetri, una buona altezza per il lavoro per Arch è 4500
- DockWindows/TreeView/Enabled (boolean): impostare su
true
per abilitare un widget agganciabile Struttura del documento indipendente dalla Vista combinata. Dopo aver modificato il valore del parametro, è necessario riavviare FreeCAD in modo che il widget sia disponibile nell'elenco Visualizza → Pannelli. - DockWindows/PropertyView/Enabled (boolean): impostare su
true
per abilitare un widget agganciabile Visualizza proprietà indipendente dalla Vista combinata. Dopo aver modificato il valore del parametro, è necessario riavviare FreeCAD in modo che il widget sia disponibile nell'elenco Visualizza → Pannelli. - DockWindows/DAGView/Enabled (boolean): Impostare su
true
per abilitare un widget agganciabile beta Vista DAG. Dopo aver modificato il valore del parametro, è necessario riavvire FreeCAD in modo che il widget sia disponibile nell'elenco Visualizza → Pannelli. - General/ComboBoxWheelEventFilter (boolean) : Impostare su
true
in modo che i widget non catturino gli eventi della rotellina del mouse e impediscano lo scorrimento delle aree scorrevoli.
Default export filename
- General/ExportDefaultFilenameMultiple (string): Set the default filename to use when exporting multiple objects. Defaults to "%F".
- General/ExportDefaultFilenameSingle (string): Set the default filename to use when exporting a single object. Defaults to "%F-%P-".
Both of these options support the automatic insertion of various pieces of information into the filename, using the following format characters:
- %F - the name of the .FCStd file (or the label, if it is not saved yet)
- %Lx - the label of the selected object(s), separated by character 'x'
- %Px - the label of the selected object(s) and their first parent, separated by character 'x'
- %U - the date and time, in UTC, ISO 8601
- %D - the date and time, in local timezone, ISO 8601
Any other characters are treated literally. If the resulting filename is illegal it will be changed on saving, with illegal characters replaced by the underscore (_).
- General/ComboBoxWheelEventFilter (boolean): Set to
true
so widgets do not catch mouse wheel event and prevent scrollable areas to be scrolled. Needs FreeCAD restart to be taken into account. - View/GestureMoveThreshold (integer): the distance (px) mouse cursor has to move to enter rotation or pan modes of Gesture navigation style. Default is 5.
- View/GestureRollFwdCommand, View/GestureRollBackCommand (string): commands to be executed by mouse button roll gestures of Gesture navigation style.
- View/GestureTapHoldTimeout (integer): sets for how long to wait (in milliseconds) to enter pan mode in Gesture navigation style. It can be helpful to increase it if dragging geometry in sketcher is difficult. Default is 700.
Keyboard shortcuts
Escape key
- General/TasksKeyEsc (boolean): Create and set to
false
to disable the ESC key exiting the Task panel in all workbenches (that is if the task panel has focus).
Specific workbenches
BIM Workbench
- Mod/BIM/DefaultPageScale (float): Default scaling for new TechDraw pages created from the BIM Workbench, in case the template doesn't contain any "Scale" or "Scaling" (case insensitive) editable text field.
Draft Workbench
- Mod/Draft/defaultCameraHeight (int): Sets the height of the camera when Draft starts in an empty document. 0 disables, FreeCAD default is 5, good when working in millimeters, a good height for arch work is 4500.
Part Workbench
- Mod/Part/ParametricRefine (boolean): Set to
false
so Part RefineShape creates an independent copy rather than a linked one. Defaults totrue
.
PartDesign Workbench
- Mod/PartDesign/AdditiveHelixPreview (boolean): Set to
true
to ensure an additive helix that does not intersect the body is visible in the preview. Defaults tofalse
. - Mod/PartDesign/SubtractiveHelixPreview (boolean): Set to
true
to ensure a subtractive helix that does not intersect the body is visible in the preview. Defaults totrue
. - Mod/PartDesign/SwitchToTask (boolean): Set to
false
to prevent the PartDesign Workbench from switching to the Task panel when starting. Defaults totrue
. - Mod/PartDesign/SwitchToWB (boolean): Set to
false
to prevent the PartDesign Workbench to be automatically called when a PartDesign Body is activated. Defaults totrue
.
Path Workbench
- The Path Workbench has two switches to enable experimental features documented in Path experimental.
Sketcher Workbench
- Mod/Sketcher/RadiusDiameterConstraintDisplayAngleRandomness (float): Set an angle randomness on the above value. Value is the range of the random angle, centered on base angle. Default is 0 degree.
- Mod/Sketcher/RadiusDiameterConstraintDisplayBaseAngle (float): Set the angle (from horizontal) used to display radius/diameter constraints in Sketcher at creation time. Default is 15 degrees (if no value set).
- Mod/Sketcher/RoundRectangleSuggConstraints (boolean): Set to
false
to disable the addition of two extra construction points when creating a rounded rectangle. introduced in version 0.21
Constraint label colors
The label in Sketcher that displays the current status of the constraints (e.g. "Underconstrained," "Fully Constrained," etc.) is styleable on a per-state basis either using the Qt stylesheet, or via user preferences. User preferences take precedence if they have been set (in Mod/Sketcher/General):
- EmptySketchMessageColor - Defaults to 50% opacity black
- UnderconstrainedMessageColor - Defaults to black
- MalformedConstraintMessageColor - Defaults to red
- ConflictingConstraintMessageColor - Defaults to red
- RedundantConstraintMessageColor - Defaults to orange red
- PartiallyRedundantConstraintMessageColor - Defaults to royal blue
- SolverFailedMessageColor - Defaults to red
- FullyConstrainedMessageColor - Defaults to green
Start Workbench
- Mod/Start/DefaultImportXXX (string): Where XXX is a lowercase file extension. For example DefaultImportifc for .IFC files. Allows to set a default import module to be used when clicking an icon on the start page, when several importers are available. For example, setting DefaultImportifc = ifc_import will use the NativeIFC importer if available. introduced in version 0.21
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub