FCGear Workbench/ru: Difference between revisions
(Updating to match new version of source page) |
(Updating to match new version of source page) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 9: | Line 9: | ||
==Введение== |
==Введение== |
||
The |
The '''FCGear Workbench''' is an [[External_workbenches|external workbench]] for manufacturing different types of gears and worm gears in FreeCAD. The parametric modelling allows the required geometries to be changed at any time. For example, by changing a few parameters, the involute gear becomes either a spur gear, helical gear or double helical gear. |
||
In order for the results from |
In order for the results from FCGear to be usable, a certain amount of basic knowledge about the different types of gearing is required. Module, pitch diameter or root diameter are common terms and should therefore be known. |
||
In conjunction with 3D printing, home users now have the opportunity to design and produce gears and worm gears according to their own personal ideas and, if necessary, to adapt them to the constructional conditions. |
In conjunction with 3D printing, home users now have the opportunity to design and produce gears and worm gears according to their own personal ideas and, if necessary, to adapt them to the constructional conditions. |
||
Line 51: | Line 51: | ||
</div> |
</div> |
||
[[Image:Involute-Gear_example.png|200px]] |
|||
{{Caption|From left to right: Spur gearing, helical gearing, double helical gearing (see [[FCGear_InvoluteGear|FCGear InvoluteGear]])}} |
|||
===Internal involute gear=== |
|||
[[Image:FCGear_InternalInvoluteGear-01.png|200px]] |
|||
{{Caption|From left to right: Spur gearing, helical gearing, double helical gearing (see [[FCGear_InternalInvoluteGear|FCGear InternalInvoluteGear]])}} |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 58: | Line 63: | ||
</div> |
</div> |
||
[[Image:Involute-Rack_example.png|x200px]] |
|||
{{Caption|From left to right: Spur gearing, helical gearing, double helical gearing (See [[FCGear_InvoluteRack|FCGear InvoluteRack]])}} |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 65: | Line 70: | ||
</div> |
</div> |
||
⚫ | |||
<div class="mw-translate-fuzzy"> |
|||
{{Caption|From left to right: Spur gearing, helical gearing, double helical gearing (see [[FCGear_CycloidGear|FCGear CycloidGear]])}} |
|||
⚫ | |||
:{{Caption|Слева направо: Прямозубая передача, косозубая передача, шевронная передача (смотрите [[FCGear_CycloideGear/ru|FCGear CycloideGear]])}} |
|||
</div> |
|||
===Cycloid rack=== |
|||
<div class="mw-translate-fuzzy"> |
|||
⚫ | |||
</div> |
|||
[[Image:FCGear_CycloidRack-01.png|x200px]] |
|||
{{Caption|From left to right: Spur gearing, helical gearing, double helical gearing (See [[FCGear_CycloidRack|FCGear CycloidRack]])}} |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
⚫ | |||
⚫ | |||
</div> |
</div> |
||
[[Image:Bevel-Gear_example.png|150px]] |
|||
{{Caption|From left to right: Spur gearing, spiral gearing (see [[FCGear_BevelGear|FCGear BevelGear]])}} |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
Line 88: | Line 89: | ||
</div> |
</div> |
||
[[File:Crown-Gear_example.png|150px]] |
|||
{{Caption|Crown gear (see [[FCGear_CrownGear|FCGear CrownGear]])}} |
|||
<div class="mw-translate-fuzzy"> |
<div class="mw-translate-fuzzy"> |
||
⚫ | |||
===Зубчатые колеса ременных и цепных передач=== |
|||
</div> |
</div> |
||
[[Image:Worm-Gear_example.png|150px]] |
|||
{{Caption|Worm gear (see [[FCGear_WormGear|FCGear WormGear]])}} |
|||
===Timing gear=== |
|||
[[File:Timing-Gear_example.png|150px]] |
|||
{{Caption|Timing gearing (see [[FCGear_TimingGear|FCGear TimingGear]])}} |
|||
===Lantern gear=== |
|||
[[File:Lantern-Gear_example.png|150px]] |
|||
{{Caption|Lantern gearing (see [[FCGear_LanternGear|FCGear LanternGear]])}} |
|||
===Hypocycloid gear=== |
|||
[[File:FCGear_FCGear_HypoCycloidGear-05.png|120px]] |
|||
{{Caption|Hypocycloid gearing (see [[FCGear_HypoCycloidGear|FCGear HypoCycloidGear]])}} |
|||
==Ссылки== |
==Ссылки== |
||
Line 104: | Line 120: | ||
* Исходный код на github: https://github.com/looooo/FCGear |
* Исходный код на github: https://github.com/looooo/FCGear |
||
==Links to |
==Links to FCGear Workbench== |
||
* FreeCAD Wiki: [[Macro_FCGear|Macro_FCGear]] |
|||
* Workbench Wiki: https://github.com/looooo/FCGear/wiki |
|||
* FreeCAD |
* FreeCAD Forum: [http://forum.freecadweb.org/viewtopic.php?f=3&t=12878 Bevel gear] and [http://forum.freecadweb.org/viewtopic.php?f=21&t=12968 FCGear] |
||
* FreeCAD Forum: http://forum.freecadweb.org/viewtopic.php?f=21&t=12968 |
|||
* Tutorials: |
* Tutorials: |
||
* Videos: |
* Videos: |
Revision as of 13:41, 19 November 2022
Логотип верстака FCGear
Введение
The FCGear Workbench is an external workbench for manufacturing different types of gears and worm gears in FreeCAD. The parametric modelling allows the required geometries to be changed at any time. For example, by changing a few parameters, the involute gear becomes either a spur gear, helical gear or double helical gear.
In order for the results from FCGear to be usable, a certain amount of basic knowledge about the different types of gearing is required. Module, pitch diameter or root diameter are common terms and should therefore be known.
In conjunction with 3D printing, home users now have the opportunity to design and produce gears and worm gears according to their own personal ideas and, if necessary, to adapt them to the constructional conditions.
The FCGear Workbench can be installed via the Addon Manager. For manual installation see Installing more workbenches.
After installation, the tools are available in the Gear toolbar and in the Gear menu.
Инструменты
- Involute Gear: Creates an external involute gear.
- Internal Involute Gear: Creates an internal involute gear.
- Involute Rack: Creates an involute rack.
- Cycloid Gear: Creates a cycloid gear.
- Cycloid Rack: Creates a cycloid rack.
- Bevel Gear: Creates a bevel gear.
- Crown Gear: Creates a crown gear.
- Worm Gear: Creates a worm gear.
- Timing Gear: Creates a timing gear.
- Lantern Gear: Creates a lantern gear.
- HypoCycloid Gear: Creates a hypocycloid gear with its pins.
- Combine two gears: Combines two gears.
Типы зубчатых колес (шестерней)
Эвольвентные зубчатые колеса
From left to right: Spur gearing, helical gearing, double helical gearing (see FCGear InvoluteGear)
Internal involute gear
From left to right: Spur gearing, helical gearing, double helical gearing (see FCGear InternalInvoluteGear)
Эвольвентные зубчатые рейки
From left to right: Spur gearing, helical gearing, double helical gearing (See FCGear InvoluteRack)
Циклоидальные зубчатые колеса
From left to right: Spur gearing, helical gearing, double helical gearing (see FCGear CycloidGear)
Cycloid rack
From left to right: Spur gearing, helical gearing, double helical gearing (See FCGear CycloidRack)
Конические зубчатые колеса
From left to right: Spur gearing, spiral gearing (see FCGear BevelGear)
Коронные зубчатые колеса
Crown gear (see FCGear CrownGear)
Червячная передача
Worm gear (see FCGear WormGear)
Timing gear
Timing gearing (see FCGear TimingGear)
Lantern gear
Lantern gearing (see FCGear LanternGear)
Hypocycloid gear
Hypocycloid gearing (see FCGear HypoCycloidGear)
Ссылки
- Автор: looooo
- Домашняя страница: https://github.com/looooo/FCGear
- Исходный код на github: https://github.com/looooo/FCGear
Links to FCGear Workbench
- FreeCAD Wiki: Macro_FCGear
- FreeCAD Forum: Bevel gear and FCGear
- Tutorials:
- Videos:
- Files:
- Report bugs: Please report bugs at https://github.com/looooo/FCGear/issues
Другие полезные ссылки
- PartDesign InvoluteGear: This tool allows for the creation of a 2D profile of an Involute gear. This 2D profile is fully parametric, and can be padded with the PartDesign Pad feature.
- External Workbenches: A list of all current external workbenches of FreeCAD
- Macros recipes
- Cycloid gearing (German)
- Involute gearing (German)
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework