Draft Snap Angle/tr: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 27: Line 27:
</div>
</div>


This snap option currently only works properly for circular edges on a plane parallel to the XY plane of the global coordinate system, the angles are relative to that plane.
In FreeCAD version 0.19 and earlier this snap option only works properly for circular edges on a plane parallel to the XY plane of the global coordinate system.


[[Image:Draft_Snap_Angle_example.png]]
[[Image:Draft_Snap_Angle_example.png]]

Revision as of 20:56, 6 January 2022

Açı

Menü konumu
Taslak → Snap → Açı
Tezgahlar
Taslak, Yapı
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri

Description

Açıklama

Daire ve yayların önemli noktalarına, 45 ° ve 90 ° 'de tutturulur.

In FreeCAD version 0.19 and earlier this snap option only works properly for circular edges on a plane parallel to the XY plane of the global coordinate system.

Snapping the second point of a line to the -30° point on a circular edge. The small magenta circles indicate all available special cardinal points.

Usage

For general information about snapping see Draft Snap.

Kullan

  1. Snap modunun açıldığından emin olun
  2. FreeCAD belgesine eklenecek öğeyi seçin
  3. Öğeyi eklemek istediğiniz önemli noktalardan birinin yakınında imleci gezdirin.
  4. İmlecin sağ tarafında aşağıda yakalama modunun simgesi görünecektir.
  5. Elemanı, hedef elemanın seçilen uç noktasına eklemek için tıklayın

Preferences

See Draft Snap.