Arch Stairs: Difference between revisions
No edit summary |
No edit summary |
||
Line 49: | Line 49: | ||
* {{PropertyData|AbsTop}}: (Output value only : ) The 'absolute' top level of a flight of stairs leads to. {{Version|0.18}} |
* {{PropertyData|AbsTop}}: (Output value only : ) The 'absolute' top level of a flight of stairs leads to. {{Version|0.18}} |
||
* {{PropertyData|Last Segment}}: Last |
* {{PropertyData|Last Segment}}: Last segment (flight or landing) of Arch Stairs connecting to this segment. The stairs will start from the level of the last segment. {{Version|0.18}} |
||
<!--T:3--> |
<!--T:3--> |
Revision as of 03:11, 1 February 2022
Arch Stairs |
Menu location |
---|
Arch → Stairs |
Workbenches |
Arch |
Default shortcut |
S R |
Introduced in version |
0.14 |
See also |
Arch Structure, Arch Equipment |
Description
The Arch Stairs tool allows you to build automatically several types of stairs. At the moment, only straight stairs (with or without a central landing) are supported. Stairs can be built from scratch, or from a straight line, in which case the stairs follow the line. If the line is not horizontal but has a vertical inclination, the stairs will also follow its slope.
See the Stairs entry in wikipedia for a definition of the different terms used to describe parts of stairs.
Two constructed stairs, one with a massive structure and a landing, and another one with a single stringer.
Options
- Stairs share the common properties and behaviours of all Arch Components
Usage
- Press the Arch Stairs button, or press S, R keys.
- Adjust the desired properties. Some parts of the stairs, such as the structure, might not appear immediately, if any of the properties makes it impossible, such as a structure thickness of 0.
Properties
Segment and Parts
- DataAbsTop: (Output value only : ) The 'absolute' top level of a flight of stairs leads to. introduced in version 0.18
- DataLast Segment: Last segment (flight or landing) of Arch Stairs connecting to this segment. The stairs will start from the level of the last segment. introduced in version 0.18
Base
- DataAlign: The alignment of these stairs on their baseline, if applicable.
- DataBase: The baseline of these stairs, if any.
- DataHeight: The total height of these stairs, if not based on a baseline, or the baseline is horizontal.
- DataLength: The total length of these stairs if no baseline is defined.
- DataWidth: The width of these stairs.
- DataWidth of Landing: When Number of Steps = 1, the Stairs object act as a Landing. And when the baseline is multi-segment, the width of each segment of the Landing follow the list set here (for 2nd edge and after - 1st edge follows Width property). introduced in version 0.18
Steps
- DataBlondel Ratio: (Output value only : ) The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in.
- DataLanding Depth: The depth of the landing of the flight, if enabled in Landings. Default to Width of stairs if 0. introduced in version 0.18
- DataNosing: The size of the nosing.
- DataNumber of Steps: The numbers of steps (risers) in these stairs.
- DataRiser Height: (Output value only : ) The height of the risers - Height of stairs / Number of Steps or Riser Height Enforce.
- DataRiser Height Enforce: The height of the risers to enforce (override overall Height of stairs). introduced in version 0.18
- DataTread Depth: (Output value only : ) The depth of the treads - Length of stairs / Number of Steps or Tread Depth Enforce.
- DataTread Depth Enforce: The depth of the treads to enforce (override overall Length of stairs). introduced in version 0.18
- DataTread Thickness: The thickness of the treads.
Structure
- DataFlight: The direction of flight after landing. Can be Straight","HalfTurnLeft",or "HalfTurnRight". introduced in version 0.18
- DataLandings: The type of landings. Can be "None" or "At center" ("At each corner" not implemented yet).
- DataStringer Offset: The offset between the border of the stairs and the structure.
- DataStringer Width: The width of the stringers.
- DataStructure: The type of structure of these stairs. Can be "None","Massive","One stringer",or "Two stringers".
- DataStructure Thickness: The thickness of the structure.
- DataWinders: The type of winders (not implemented).
Limitations
- Only straight stairs are available at the moment
- See the forum entry for circle stairs.
- See the forum announcement.
Scripting
See also: Arch API and FreeCAD Scripting Basics.
The Stairs tool can be used in macros and from the Python console by using the following function:
Stairs = makeStairs(baseobj=None, length=None, width=None, height=None, steps=None, name="Stairs")
- Creates a
Stairs
object from the givenbaseobj
. - If
baseobj
is not given, it will uselength
,width
,height
, andsteps
, to build a solid object.
Example:
import Arch
Stairs = Arch.makeStairs(length=5000, width=1200, height=3000, steps=14)
- Elements: Wall, Structure, Curtain Wall, Window, Roof, Space, Stairs, Equipment, Frame, Fence, Truss, Profile, Pipe, Pipe Connector
- Reinforcements: Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement, Custom Rebar
- Panels: Panel, Panel Cut, Panel Sheet, Nest
- Materials: Material, Multi-Material
- Organization: Building Part, Project, Site, Building, Level, External reference, Section Plane, Schedule
- Axes: Axis, Axes system, Grid
- Modification: Cut with plane, Add component, Remove component, Survey
- Utilities: Component, Clone component, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, 3 Views from mesh, Create IFC spreadsheet, Toggle Subcomponents
- Additional: Preferences, Import Export Preferences (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub