Arch Пространство
Arch Space |
Системное название |
---|
Arch Space |
Расположение в меню |
Архитектура → Пространство |
Верстаки |
Arch |
Быстрые клавиши |
S P |
Представлено в версии |
0.14 |
См. также |
Arch Wall/ru, Arch Structure/ru |
Определение
Инструмент Пространство позволяет определить пустое пространство, базируясь на твердой оболочке, или определив границы, или и тем, и другим. Если он базируется только на границах, объем вычисляется, исходя из ограничительного блока всех заданных границ, и вычитая пространство за каждой границей. Пространственный объект всегда определяет твердотельный объём. Площадь пола пустого пространства вычисляемая пересечением горизонтальной плоскости через центр масс пустого пространства, так же может показываться установкой режима показа пространственного объекта в "detailed".
На рисунке выше пространственный объект создан из существующего твердотельного объекта, затем две стены добавлены как границы, и режим показа установлен в "detailed" для показа занимаемой площади.
Применение
- Выберите существующий твердый объект или грани на граничных объектах
- Нажмите кнопку Arch Space или нажмите клавиши S, P
Ограничения
- The boundaries properties is currently not editable via GUI.
- See the forum announcement.
Свойства
- ДанныеBase: Базовый объект, если он есть (должен быть твердым)
- Данные Boundaries: список необязательных граничных элементов
- ВидText: The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data
- ВидFontName: The name of the font
- ВидTextColor: The color of the text
- ВидFontSize: The size of the text
- ВидFirstLine: The size of the first line of text (multiplies the font size. 1 = same size, 2 = double size, etc..)
- ВидLineSpacing: The space between the lines of text
- ВидTextPosition: The position of the text. Leave (0,0,0) for automatic position
- ВидTextAlign: The justification of the text
- ВидDecimals: The number of decimals to use for calculated texts
- ВидShowUnit: Show the unit suffix or not
Опции
- To create zones that group several spaces, use a Arch BuildingPart and set its IFC type to "Spatial Zone"
- The space object has the same display modes as other Arch and Part objects, with one more, called Footprint, that displays only the bottom face of the space.
Программирование
Смотрите так же: Основы составления скриптов в FreeCAD.
Инструмент Пространства можно использовать в сценариях python и макросы, используя следующую функцию:
Space = makeSpace(objects=None, baseobj=None, name="Space")
- Creates a
Space
object from the givenobjects
orbaseobj
, which can be- one document object, in which case it becomes the base shape of the space object, or
- a list of selection objects as returned by
FreeCADGui.Selection.getSelectionEx()
, or - a list of tuples
(object, subobjectname)
Пример:
import FreeCAD, Arch
Box = FreeCAD.ActiveDocument.addObject("Part::Box", "Box")
Box.Length = 1000
Box.Width = 1000
Box.Height = 1000
Space = Arch.makeSpace(Box)
Space.ViewObject.LineWidth = 2
FreeCAD.ActiveDocument.recompute()
After a space object is created, selected faces can be added to it with the following code:
import FreeCAD, FreeCADGui, Draft, Arch
points = [FreeCAD.Vector(-500, 0, 0), FreeCAD.Vector(1000, 1000, 0)]
Line = Draft.makeWire(points)
Wall = Arch.makeWall(Line, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()
# Select a face of the wall
selection = FreeCADGui.Selection.getSelectionEx()
Arch.addSpaceBoundaries(Space, selection)
Boundaries can also be removed, again by selecting the indicated faces:
selection = FreeCADGui.Selection.getSelectionEx()
Arch.removeSpaceBoundaries(Space, selection)
- Elements: Wall, Structure, Curtain Wall, Window, Roof, Space, Stairs, Equipment, Frame, Fence, Truss, Profile, Pipe, Pipe Connector
- Reinforcements: Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement, Custom Rebar
- Panels: Panel, Panel Cut, Panel Sheet, Nest
- Materials: Material, Multi-Material
- Organization: Building Part, Project, Site, Building, Level, External reference, Section Plane, Schedule
- Axes: Axis, Axes system, Grid
- Modification: Cut with plane, Add component, Remove component, Survey
- Utilities: Component, Clone component, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, 3 Views from mesh, Create IFC spreadsheet, Toggle Subcomponents
- Additional: Preferences, Import Export Preferences (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework