Sketcher Contrainte de dimension
Sketcher Contrainte de dimension |
Emplacement du menu |
---|
Esquisse → Contraintes d'esquisse → Contrainte de dimension |
Ateliers |
Sketcher |
Raccourci par défaut |
D |
Introduit dans la version |
0.22 |
Voir aussi |
Aucun |
Description
The Sketcher Dimension tool is the context-sensitive constraint tool of the Sketcher Workbench. Based on the current selection, it offers appropriate dimensional constraints, but also geometric constraints.
Utilisation
See also: Drawing aids.
- Optionally select one or more elements (edges or points). B-spline edges are currently not supported.
- There are several ways to invoke the tool:
- If the Dimensioning constraints preference is set to
Both
orSingle tool
(default): press the Dimension button. - Select the Sketch → Sketcher constraints → Dimension option from the menu.
- Right-click in the 3D view and select the Dimension → Dimension option from the context menu.
- If there is a selection: Right-click in the 3D view and select the Dimension option from the context menu.
- Use the keyboard shortcut: D.
- If the Dimensioning constraints preference is set to
- The cursor changes to a cross with the tool icon.
- If you have not yet selected an element: select one.
- Depending on the selected element(s) a constraint is proposed.
- Optionally select an additional element.
- Optionally deselect an element by clicking it again.
- The proposed constraint is updated after every selection change.
- Optionally press the M key one or more times to cycle through other available constraints, if any.
- If a geometric constraint is proposed, selected elements may change giving a preview of the result.
- Do one of the following:
- Click in an empty area in the 3D view to confirm:
- If a dimensional constraint is created the clicked point determines its location. For a linear dimension the clicked point also determines its type: Horizontal distance, Vertical distance or Distance.
- If a driving dimensional constraint is created, depending on the preferences, a dialog opens to edit its value.
- A constraint is added.
- This tool always runs in continue mode: optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
- Click in an empty area in the 3D view to confirm:
Sketcher
- Général : Créer une esquisse, Modifier l'esquisse, Esquisse sur une face, Réorienter l'esquisse, Valider l'esquisse, Fusionner les esquisses, Esquisse miroir, Quitter l'esquisse, Vue de l'esquisse, Vue de section, Grille, Aimantation, Ordre de rendu, Arrêt de l'opération
- Géométries : Point, Ligne, Arc, Arc par 3 points, Cercle, Cercle par 3 points, Ellipse par son centre, Ellipse par 3 points, Arc d'ellipse, Arc d'hyperbole, Arc de parabole, B-spline simple, B-spline périodique, B-spline par des nœuds, B-spline périodique par des nœuds, Polyligne, Rectangle, Rectangle centré, Rectangle arrondi, Triangle, Carré, Pentagone, Hexagone, Heptagone, Octogone, Polygone régulier, Contour oblong, Congé, Congé avec contrainte, Ajuster, Prolonger, Diviser, Géométrie externe, Copie carbone, Géométrie de construction
- Contraintes :
- Contraintes geometriques : Coïncidence, Point sur objet, Vertical, Horizontal, Parallèle, Perpendiculaire, Tangente, Égalité, Symétrie, Blocage
- Contraintes de dimension : Fixe, Distance horizontale, Distance verticale, Dimensionnelle, Rayon ou poids, Diamètre, Rayon automatique, Angle, Contrainte de réfraction
- Outils de contraintes : Contraintes pilotantes, Activation des contraintes
- Outils : Degrés de liberté non contraints, Contraintes associées, Éléments associés aux contraintes, Contraintes redondantes, Contraintes conflictuelles, Géométrie interne, Origine, Axe horizontal, Axe vertical, Symétrie, Clone, Copie, Déplacer, Réseau rectangulaire, Supprimer l'alignement des axes, Supprimer tous les éléments de géométrie, Supprimer toutes les contraintes
- Outils B-spline : Degré de la B-spline, Polygone de contrôle de la B-spline, Peigne de courbure, Multiplicité des nœuds, Poids des points de contrôle, Convertir une géométrie en B-spline, Augmenter le degré, Diminuer le degré, Augmenter la multiplicité des nœuds, Diminuer la multiplicité des nœuds, Insérer un nœud, Joindre des courbes
- Espace virtuel : Espace virtuel
Hub utilisateurs
- Démarrer avec FreeCAD
- Installation : Téléchargements, Windows, Linux, Mac, Logiciels supplémentaires, Docker, AppImage, Ubuntu Snap
- Bases : À propos de FreeCAD, Interface, Navigation par la souris, Méthodes de sélection, Objet name, Préférences, Ateliers, Structure du document, Propriétés, Contribuer à FreeCAD, Faire un don
- Aide : Tutoriels, Tutoriels vidéo
- Ateliers : Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test