Sketcher Maßeintrag
Outdated translations are marked like this.
Sketcher Maßeintrag |
Menüeintrag |
---|
Skizze → Sketcher-Randbedingungen → Maßeintrag |
Arbeitsbereich |
Sketcher |
Standardtastenkürzel |
D |
Eingeführt in Version |
0.22 |
Siehe auch |
Keiner |
Beschreibung
The Sketcher Dimension tool is the context-sensitive constraint tool of the Sketcher Workbench. Based on the current selection, it offers appropriate dimensional constraints, but also geometric constraints.
Anwendung
See also: Drawing aids.
- Optionally select one or more elements (edges or points). B-spline edges are currently not supported.
- There are several ways to invoke the tool:
- If the Dimensioning constraints preference is set to
Both
orSingle tool
(default): press the Dimension button. - Select the Sketch → Sketcher constraints → Dimension option from the menu.
- Right-click in the 3D view and select the Dimension → Dimension option from the context menu.
- If there is a selection: Right-click in the 3D view and select the Dimension option from the context menu.
- Use the keyboard shortcut: D.
- If the Dimensioning constraints preference is set to
- The cursor changes to a cross with the tool icon.
- If you have not yet selected an element: select one.
- Depending on the selected element(s) a constraint is proposed.
- Optionally select an additional element.
- Optionally deselect an element by clicking it again.
- The proposed constraint is updated after every selection change.
- Optionally press the M key one or more times to cycle through other available constraints, if any.
- If a geometric constraint is proposed, selected elements may change giving a preview of the result.
- Do one of the following:
- Click in an empty area in the 3D view to confirm:
- If a dimensional constraint is created the clicked point determines its location. For a linear dimension the clicked point also determines its type: Horizontal distance, Vertical distance or Distance.
- If a driving dimensional constraint is created, depending on the preferences, a dialog opens to edit its value.
- A constraint is added.
- This tool always runs in continue mode: optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
- Click in an empty area in the 3D view to confirm:
Sketcher
(FIXME)
- Die Werkzeuge: Skizze erstellen, Skizze bearbeiten, Skizze verlassen, Skizze anzeigen, View section, Skizze einer Fläche zuordnen..., Reorient sketch, Skizze überprüfen, Skizzen zusammenführen, Skizze spiegeln
- Skizzen-Geometrien: Punkt, Linie, Bögen erstellen, Bogen, Kreisbogen durch drei Punkte, Kreise erstellen, Kreis, Kreis durch drei Punkte, Kegelförmige Körper erstellen, Ellipse mit Mittelpunkt, Ellipse durch drei Punkte, Ellipsenbogen, Hyperbel erstellen, Parabel erstellen, B-splines erstellen, B-spline, Create periodic B-spline, Linienzug (Mehrpunktlinie), Rechteck, Reguläres Polygon erstellen, Dreieck, Quadrat, Fünfeck, Sechseck, Siebeneck, Achteck, Create Regular Polygon, Nut, Abrundung erstellen, Kante zuschneiden, Verlängern, Externe Geometrie, CarbonCopy, Konstruktionsmodus
- Skizzenbeschränkungen
- Geometrische Beschränkungen Koinzidenz erzwingen, Punkt auf Objekt festlegen, Vertikal, Horizontal, Parallel, Orthogonal, Tangente, Gleichheit, Symmetrisch, Constrain Block
- Dimensional constraints Sperren, Horizontaler Abstand, Vertikaler Abstand, Distanz festlegen, Radius festlegen, Winkel festlegen, Snell's Law, Umschalten auf steuernde Bemaßung,
- Sketcher tools Select solver DOFs, Close Shape, Connect Edges, Select Constraints, Select Origin, Select Vertical Axis, Select Horizontal Axis, Select Redundant Constraints, Select Conflicting Constraints, Select Elements Associated with constraints, Show/Hide internal geometry, Symmetry, Clone, Copy, Move, Rectangular Array, Delete All Geometry, Delete All Constraints
- Sketcher B-spline tools Show/Hide B-spline degree, Show/Hide B-spline control polygon, Show/Hide B-spline curvature comb, Show/Hide B-spline knot multiplicity, Convert Geometry to B-spline, Increase degree, Increase knot multiplicity, Decrease knot multiplicity
- Sketcher virtual space Switch Virtual Space
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web