PartDesign: Transformări Multiple
PartDesign MultiTransform |
Menu location |
---|
PartDesign -> MultiTransform |
Workbenches |
PartDesign, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Introducere
'Faceți un model din combinații de transformări' - Acest instrument ia un set de una sau mai multe caracteristici selectate ca intrări ("originalele") și permite aplicarea mai multor transformări succesiv la ele. De exemplu, pentru a produce o flanșă cu un rând dublu de găuri, gaura ("originalul") este mai întâi modelată într-un model liniar în direcția X și apoi modelată de opt ori într-un model polar în jurul axei Y.
'Make a pattern from combinations of transformations' - The MultiTransform tool takes one (or a set of) part 'features' as its input, and allows the user to apply multiple transformations to that feature (or set of features) progressively, in sequence - creating a combined or compound transformation.
For example, to produce the flange with a double row of holes as pictured below, the user:
- selected the hole as the 'feature' (base) in the Model tree
- clicked on the MultiTransform icon
- added a linear pattern with two occurrences in the X direction
- added a polar pattern with eight occurrences around the Y axis.
Flange with double row of holes. Hole pattern created with 'MultiTransform' tool.
Usage
Before beginning any of the methods below, make sure the necessary Body object is active; if not, you will receive a pop-up error message stating you need an active Body object before using the MultiTransform tool.
Standard Method
This method starts with no existing transformation features and no selections in the viewport or the Model object tree.
When initiated and completed with this method, the MultiTransform should correctly become the "Tip" of the Body object.
- Click on the MultiTransform icon to initiate the operation.
- You will be prompted with the Select feature window.
From the list, select one initial feature to be used for the transformations and click OK to proceed.
You may add additional features in the next step. - The Transformed features messages and MultiTransform parameters window will appear.
You will see the label of the feature you selected in the feature list view, below the Add feature and Remove feature buttons.- Click the Add feature button in the transform tool
- Switch to the Model tree view (Click on Model tab)
- Select the feature you want to add, and make it visible(spacebar, or right-click and toggle visibility).
- Note: This will hide the previously visible feature.
- Click on anything in 3D view (viewport).
- Click on Tasks tab in Combo View to return to MultiTransform parameters window.
- You should see the label of the recently selected feature appear in the feature list view.
- Below the feature list view is the Transformations list view. Within you should see the text, "Right-click to add".
- Add a transformation by right-clicking in the Transformations list view to display the options list.
- Add the desired transformation by selecting it in the options list.
- The new transformation entry will appear in the Transformations list with corresponding settings appearing below the list.
- Adjust the settings for the new transformation. (You will see the preview in the viewport.)
- Click the OK button underneath these settings to save the new transformation.
- Continue to add transformations in the order you wish to apply them using Step 5 above.
- You may also edit, delete, and move (change the order of) the transformations as needed by right-clicking on a transformation in the Transformations list and selecting the corresponding option.
- When you are finished adding and editing the transformations, click the OK button at the very top to save the MultiTransform and exit.
Alternate Method 1
This method starts with one existing transformation feature in the Body object.
- In the Model tree, within the active Body object, select the existing features to be included.
- Click on the MultiTransform icon to initiate the operation.
- In the feature list view, you will see the label(s) of the previously selected feature(s).
To add additional features, see Step 3 in the Standard Method above. - Finish using Steps 5-8 in the Standard Method above.
Alternate Method 2
This method starts with multiple existing, independent feature transformations in the Body object - with the idea of combining them. NOTE: to combine existing transformations, they must be within the same Body object and should all use the same feature or feature set in each.
- In the Model tree, within the active Body object, select one of existing transformation of those you wish to include.
- Click on the MultiTransform icon to initiate the operation.
- Click the OK button at top to save and exit.
- In the object tree, select the newly created MultiTransform.
- In the Property View window, locate the Transformations property in the Data tab.
- Edit the Transformations property by clicking on its value, then click on the ellipse box that appeared to open the Links window for this property.
- Select all existing feature transformations that should be included. Multiple selections are permitted using CTRL + click.
- Click OK to save and close the Links window.
- Click the Refresh button if activated.
When initiated and completed in this way, the MultiTransform might fail to become the "Tip" of the Body object. If you need it to be the "Tip":
- Right click on the newly created MultiTransform.
- If available, choose "Set tip".
Usage Notes
- Supported feature transformations are: Mirrored, Linear Pattern, Polar Pattern, and SCALED transformation.
- Each transformation linked to the MultiTransform should use the same feature, or set of features, in each.
Limitations
- A scaled transformation should not be the first in the list
- The scaled transformation must have the same number of occurrences as the transformation immediately preceding it in the list
- For further limitations, see the Linear Pattern
Options
Opțiuni
Atunci când creați o funcție multitransformare, dialogul "parametrii multitransformați" oferă două vizualizări de listă diferite. Selectați originaleleThe list view shows the 'originals', the features that are to be patterned. Clicking on any feature will add it to the list. Selectați transformărileThis list can be filled with a combination of the simple transformations mirrored, linear pattern, polar pattern and scaled. The transformations will be applied one after the other. The context menu offers the following entries: EditareAllows editing the parameters of a transformation in the list (double-clicking will have the same effect) ȘtergereRemoves a transformation from the list Adăugarea transformăriAdds a transformation to the list Mutarea Sus/JosPermite modificarea ordinii transformărilor din listă |
Select originals
The list view shows the 'originals', the features that are to be patterned. Clicking on any feature will add it to the list.
Select transformations
This list can be filled with a combination of the simple transformations mirrored, linear pattern, polar pattern and scaled. The transformations will be applied one after the other. The context menu offers the following entries:
Edit
Allows editing the parameters of a transformation in the list (double-clicking will have the same effect)
Delete
Removes a transformation from the list
Add transformation
Adds a transformation to the list
Move Up/Down
Allows changing the order of transformations in the list |}
Examples
Example
Cel mai mic bosaj a fost modelat mai întâi de trei ori în direcția X și apoi scalat la factorul doi (deci cele trei apariții au factorul de scalare 1,0, 1,5 și 2,0). Apoi a fost aplicat un model polar cu 8 apariții. c | centru | 800px Buzunarul a fost primul oglindit pe planul YZ și apoi modelat cu două modele liniare pentru a da un model dreptunghiular.
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system
- Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Boolean: Boolean operation
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub