零件球体
Part Sphere |
Menu location |
---|
Part → Primitives → Sphere |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Primitives |
描述
利用位置、角度1、角度2、角度3与半径参数创建一个简单的参数化球体。
如何使用
在零件工作台中点击球体图标。球体在创建时会被定位在原点(point 0,0,0)处。角度参数确定了所创的是局部球体,而非完整的球体(角度参数的默认设置值为360°)。
Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.
选项
以下图示给出的是不同于默认值的参数化球体的概述:
- 数据Radius: Radius of the sphere
- 数据Angle 1: 1nd angle to cut / define the sphere
- 数据Angle 2: 2nd angle to cut / define the sphere
- 数据Angle 3: 3rd angle to cut / define the sphere
由于很难描述angle 1、angle 2、angle 3这三个参数的意义,因此以下列图示来向您展示关于angle 1 = -45°, angle 2 = 45° 与 angle 3 = 90°时的效果,从而对此进行解释。
Part
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub