PartDesign ProceduraGuidataAlberi
PartDesign Assistente per albero |
Posizione nel menu |
---|
Nessuno |
Ambiente |
PartDesign, Completo |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Nessuno |
Questo strumento consente di creare un albero (di trasmissione) da una tabella di valori, e di analizzare forze e momenti. È possibile avviare la procedura guidata digitando:
Gui.runCommand('PartDesign_WizardShaft')
nella console Python di FreeCAD.
Quando la procedura guidata si avvia, viene visualizzata la tabella di default, l'albero e i relativi grafici di forza e momento.
La parte superiore della finestra è occupata dalla tabella. La tabella è organizzata in colonne numerate, come un foglio di calcolo, e ogni colonna corrisponde a un segmento dell'albero.
Ogni porzione di albero, si caratterizza per la sua lunghezza e il suo diametro.
La finestra principale visualizza due schermate:
- La prima è l'albero stesso (un oggetto Parte prodotto con una rivoluzione), visibile nell'immagine sopra.
- La seconda schermata visualizza i grafici delle forze di taglio e i momenti prodotti dai carichi definiti nella tabella.
Prerequisiti
L'assistente di creazione dell'albero dipende da matplotlib per creare e visualizzare i grafici della forza di taglio e del momento di flessione. Per i sistemi basati su Debian/Ubuntu, è disponibile tramite il pacchetto python-matplotlib.
Parameters
For each shaft segment, the following parameters can be defined
- Length of the segment
- Diameter of the segment
- Load type. Note that you have to click on the desired entry in the menu after scrolling to it, otherwise it will not be selected!
- None: No load
- Fixed: The end of the shaft is fixed (e.g. welded to another part). This load type can only be defined for the first or last segment.
- Static: There is a static load on this shaft segment
- Load on the shaft segment
- Location where the load is applied to the segment. The location is counted from the left-hand edge of the segment
(Other rows and load types exist but no functionality has been implemented yet)
Menu
Per aggiungere un nuovo segmento all'albero, fare clic con il tasto destro nello spazio vuoto a destra della tabella, quindi fare clic su Aggiungi colonna.
Limitazioni
- Non è possibile avere segmenti dell'albero adiacenti con lo stesso diametro.
Funzionalità pianificate
- Smussi e arrotondamenti dei bordi dell'albero, gestiti tramite la tabella.
- Riconoscimento assistito delle parti dell'albero creato in precedenza per inizializzare la tabella utilizzando i suoi valori.
- Calcolo della tensione dell'albero.
- Visualizzare i carichi sull'albero (questa funzione può utilizzare le stesse funzionalità del modulo FEM).
- Definizione dei carichi come un oggetto "Document" (questa funzione può utilizzare le stesse funzionalità del modulo FEM).
- Materiali di database.
- Permettere di far lavorare carichi nella direzione Z e nella direzione Y (richiede che il carico sia considerato come un oggetto "Document", altrimenti la tabella può diventare troppo lunga).
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Attach sketch, Edit sketch, Validate sketch, Check geometry, Create a sub-object(s) shape binder, Create a clone, Create a datum plane, Create a datum line, Create a datum point, Create a local coordinate system
- Modeling tools:
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Boolean: Boolean operation
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Preferences: Preferences, Fine tuning
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub