PartDesign Цепное колесо (звёздочка)

From FreeCAD Documentation
Revision as of 18:07, 3 September 2022 by Evgeniy (talk | contribs) (Created page with "{{GuiCommand/ru |Name/ru=Цепное колесо (звёздочка) |Name=PartDesign_Sprocket |MenuLocation=Part Design → Цепное колесо (звёздочка)...")

Цепное колесо (звёздочка)

Системное название
PartDesign_Sprocket
Расположение в меню
Part Design → Цепное колесо (звёздочка)
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.19
См. также
Нет

Описание

This tool allows you to create a 2D profile of a sprocket (or chainwheel). It can be padded with the PartDesign Pad feature.

Применение

  1. Optionally activate the correct body.
  2. Go to the menu Part Design → Sprocket....
  3. Set the ДанныеNumber Of Teeth and the ДанныеSprocket Reference.
  4. Click OK.
  5. If there was no active body: drag and drop the sprocket into a body for the application of further features like padding.

Свойства

  • ДанныеNumber Of Teeth: Number of teeth
  • ДанныеSprocket Reference: The sprocket type. A list of sprocket definitions. introduced in version 0.20 The list includes ANSI and ISO-norms as well as some bicycle and motorcycle sprocket definitions.
  • ДанныеPitch: Distance between two teeth
  • ДанныеRoller Diameter: Diameter of the chain rollers the sprocket is designed for
  • ДанныеThickness:The principal thickness of the sprocket. Note: The sprocket cannot just be padded with this thickness because the teeth have side chamfers. Therefore look at the sprocket definition to model a valid 3D sprocket. introduced in version 0.20