零件球体
Part Sphere |
Menu location |
---|
Part → Primitives → Sphere |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Primitives |
Description
描述
利用位置、角度1、角度2、角度3与半径参数创建一个简单的参数化球体。
A Part Sphere can be truncated at the top and/or bottom by changing its 数据Angle1 and/or 数据Angle2 properties. It can be turned into a segment of a sphere by changing its 数据Angle3 property.
Usage
如何使用
在零件工作台中点击球体图标。球体在创建时会被定位在原点(point 0,0,0)处。角度参数确定了所创的是局部球体,而非完整的球体(角度参数的默认设置值为360°)。
Example
A Part Sphere object created with the scripting example below is shown here.
Notes
- A Part Sphere can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.
选项
See also: Property editor.
A Part Sphere object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Sphere
- 数据Radius (
Length
): The radius of the sphere. The default is5mm
. - 数据Angle1 (
Angle
): The start angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to 数据Angle2. The default is-90°
. - 数据Angle2 (
Angle
): The end angle of the circular arc profile of the sphere. Valid range:-90° <= value <= 90°
. May not be equal to 数据Angle1. The default is90°
. If the total angle of the arc profile is smaller than180°
the sphere will be truncated and have a flat face at the top and/or bottom. - 数据Angle3 (
Angle
): The total angle of revolution of the sphere. Valid range:0° < value <= 360°
. The default is360°
. If it is smaller than360°
the resulting solid will be a segment of a sphere.
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Sphere can be created with the addObject()
method of the document:
sphere = FreeCAD.ActiveDocument.addObject("Part::Sphere", "mySphere")
- Where
"mySphere"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
sphere = doc.addObject("Part::Sphere", "mySphere")
sphere.Radius = 20
sphere.Angle1 = -30
sphere.Angle2 = 45
sphere.Angle3 = 90
sphere.Placement = App.Placement(App.Vector(3, 9, 11), App.Rotation(75, 60, 30))
doc.recompute()
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub