작업대(Workbench)

From FreeCAD Documentation
Revision as of 14:41, 19 May 2024 by Urstein (talk | contribs)

Revit 또는 CATIA와 같은 많은 최신 디자인 응용 프로그램과 마찬가지로 FreeCAD는 [ https://en.wikipedia.org/wiki/Workbench 작업대]개념을 기초로 하고 있습니다. 작업대는 특정 작업을 위해 특별히 그룹화된 도구 모음로 볼 수 있습니다. 전통적인 가구 작업장에는 나무를 다루는 사람을 위한 작업대가 있고, 금속 조각을 다루는 사람을 위한 작업대가 있고, 나무와 금속 부품들을 함께 조립하는 사람을 위한 세 번째 작업대가 있을 것입니다.

FreeCAD 에서, 같은 개념이 적용된다. 하나의 작업대에는 해당 업무에 관련된 도구들이 모아져 있다.

다른 작업환경으로 변경하면, 화면에서 이용할 수 있는 도구들이 바뀐다. 툴바, 명령어 바 등의 여러가지 화면 내용이 새로운 작업환경에 따라서 바뀌지만, 작업대상물의 모습은 바뀌지 않는다. 예를 들면, 도면 작업환경에서 2D 형태의 그림으로 시작하고, 부분수정 작업환경으로 변경해서 계속 작업을 할 수 있다.

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special type of Module with a GUI configuration (toolbars and menus).

내장 workbenches

Current

The following workbenches are bundled with every FreeCAD installation:

  • Std Base. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.
  • The CAM Workbench is used to produce G-Code instructions. This workbench was called "Path Workbench" in version 0.21 and below.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.
  • The Inspection Workbench is made to give you specific tools for examination of shapes. Still in the early stages of development.
  • The Part Workbench for working with geometric primitives and boolean operations.
  • The Reverse Engineering Workbench is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features.

Obsolete

The following workbenches are no longer included after version 0.21:

  • The Start Workbench allows you to quickly jump to one of the most common workbenches.

The following workbenches are no longer included after version 0.20:

외부 workbenches

FreeCAD workbenches are easy to program in Python, there are therefore many people developing additional workbenches outside of the FreeCAD main development area.

The external workbenches page lists all that are known to this community. Most are easily installable from within FreeCAD, using the Addon Manager, found under menu Tools → Addon manager.