Workbenches/ko: Difference between revisions

From FreeCAD Documentation
(Created page with "* 32px The 스케치 작업대에서는 형상 구속이 있는 스케치를 합니다.")
No edit summary
Line 47: Line 47:
* [[Image:Workbench_Reverse_Engineering.svg|32px]] The [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features.
* [[Image:Workbench_Reverse_Engineering.svg|32px]] The [[Reverse_Engineering_Workbench|Reverse Engineering Workbench]] is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features.


* [[Image:Workbench_Robot.svg|32px]] The [[Robot_Workbench/k|로봇 작업대]] 에서는 로봇의 움직임을 다루는데 현재는 관리되지 않고 있습니다.
* [[Image:Workbench_Robot.svg|32px]] The [[Robot_Workbench/ko|로봇 작업대]] 에서는 로봇의 움직임을 다루는데 현재는 관리되지 않고 있습니다.


* [[Image:Workbench_Sketcher.svg|32px]] The [[Sketcher_Workbench/ko|스케치 작업대]]에서는 형상 구속이 있는 스케치를 합니다.
* [[Image:Workbench_Sketcher.svg|32px]] The [[Sketcher_Workbench/ko|스케치 작업대]]에서는 형상 구속이 있는 스케치를 합니다.

Revision as of 14:37, 21 May 2024

Revit 또는 CATIA와 같은 많은 최신 디자인 응용 프로그램과 마찬가지로 FreeCAD는 작업대개념을 기초로 하고 있습니다. 작업대는 특정 작업을 위해 특별히 그룹화된 도구 모음로 볼 수 있습니다. 전통적인 가구 작업장에는 나무를 다루는 사람을 위한 작업대가 있고, 금속 조각을 다루는 사람을 위한 작업대가 있고, 나무와 금속 부품들을 함께 조립하는 사람을 위한 세 번째 작업대가 있을 것입니다.

FreeCAD 에서, 같은 개념이 적용됩니다. 하나의 작업대에는 해당 작업에 관련된 도구들이 모여 있습니다.

다른 작업대로 변경하면, 화면에서 이용할 수 있는 도구들이 바뀝니다. 툴바, 명령어 바 등의 여러가지 화면 내용이 새로운 작업대에 따라서 바뀌지만, 작업대상물의 모습은 바뀌지 않습니다. 예를 들면, 제도 작업대에서 2D 형태의 그림으로 시작하고, 부품 작업대로 변경해서 계속 작업을 할 수 있습니다.

때로는 작업대를 '모듈'이라고 부르기도 합니다. 그러나 작업대와 모듈은 서로 다른 것입니다. 작업대를 포함하여 FreeCAD의 어떠한 확장 프로그램들은 모두 모듈이지만 작업대는 GUI 구성(도구모음과 메뉴)을 갖춘 특별한 유형의 모듈입니다.

내장된 작업대

현재

다음 작업대들은 FreeCAD 설치시 묶음으로 같이 제공됩니다.

  • Std Base. This is not really a workbench, but rather a category of 'standard' commands and tools that can be used in all workbenches.
  • The CAM Workbench is used to produce G-Code instructions. This workbench was called "Path Workbench" in version 0.21 and below.
  • The FEM 작업대에서는 유한요소 해석을 할 수 있습니다.
  • The Inspection Workbench is made to give you specific tools for examination of shapes. Still in the early stages of development.
  • The Part Workbench for working with geometric primitives and boolean operations.
  • The Reverse Engineering Workbench is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features.
  • The 로봇 작업대 에서는 로봇의 움직임을 다루는데 현재는 관리되지 않고 있습니다.

더 이상 사용되지 않음

The following workbenches are no longer included after version 0.21:

  • The Start Workbench allows you to quickly jump to one of the most common workbenches.

The following workbenches are no longer included after version 0.20:

외부 작업대

프리캐드의 작업대들은 python으로 프로그램하기가 쉽습니다. 그래서 많은 사람들이 프리캐드의 주 개발 영역 밖에서도 추가적인 작업대들을 만들어 내고 있습니다.

The external workbenches page lists all that are known to this community. Most are easily installable from within FreeCAD, using the Addon Manager, found under menu Tools → Addon manager.