Sketcher CreatePoint/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 27: Line 27:
==Options==
==Options==


* By default points are created as construction geometry and therefore not visible outside of Sketch editing mode. Use the [[File:Sketcher_ToggleConstruction.svg|16px]] [[Sketcher_ToggleConstruction|Toggle Construction]] tool to change them to normal geometry.
A mode to snap to the grid can be set in the [[Sketcher_Preferences|Sketcher Preferences]]. The point snaps then to the grid, if it has less than 25% grid distance to a grid line.
The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.
* A mode to snap to the grid can be set in the [[Sketcher_Preferences|Sketcher Preferences]]. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

==Limitations==

The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the [[PartDesign_Point|PartDesign Point]] for a datum point or the [[Part_Point|Part Point]] instead.





Revision as of 10:39, 10 November 2021

Sketcher Point

Menyplacering
Sketch → Sketcher geometries → Create point
Arbetsbänkar
Sketcher
Standard genväg
Ingen
Introducerad i version
-
Se även
Ingen

Beskrivning

The Point tool creates a point in the current sketch, which can be used for constructing geometry elements. The point is always an construction element and does not show up in the 3D-view.

Point in the sketcher

Usage

  • Click on the button Create point, to activate the function.
  • Clicking in the sketch creates a point.
  • Pressing Esc or clicking the right mouse button cancels the function.

Options

  • By default points are created as construction geometry and therefore not visible outside of Sketch editing mode. Use the Toggle Construction tool to change them to normal geometry.
  • A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.