Part Sphere/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "以下图示给出的是不同于默认值的参数化球体的概述:")
(Created page with "== 如何使用 == 在零件工作台中点击球体图标32px。The sphere will be positioned at origin (point 0,0,0) on creation...")
Line 9: Line 9:
[[File:SimpleSphere.jpg|400px]]
[[File:SimpleSphere.jpg|400px]]


== How to use ==
== 如何使用 ==
In the workbench [[Part_Workbench|Part]] click on the sphere icon [[Image:Part Sphere.png|32px]]. The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
[[Part_Workbench|零件]]工作台中点击球体图标[[Image:Part Sphere.png|32px]]The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).


== 选项 ==
== 选项 ==

Revision as of 03:16, 12 July 2019

Part Sphere

Menu location
Part → Sphere
Workbenches
Part Module
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

描述

利用位置、角度1、角度2、角度3与半径参数创建一个简单的参数化球体。

如何使用

零件工作台中点击球体图标。The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).

选项

参数化球体有以下参数定义而成:

  • 半径(Radius)
  • 角度1(Angle 1)
  • 角度2(Angle 2)
  • 角度3(Angle 3)
  • 以及标准的一系列定位参数

以下图示给出的是不同于默认值的参数化球体的概述:

Parameter

  • Radius: Radius of the sphere
  • Angle 1: 1nd angle to cut / define the sphere
  • Angle 2: 2nd angle to cut / define the sphere
  • Angle 3: 3rd angle to cut / define the sphere

Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.