Part Cylinder/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 18: Line 18:
==Usage==
==Usage==


# Open the {{Button|[[Image:Workbench_Part.svg|16px]] [[Part Workbench|Part]]}} Workbench.
# Switch to the [[Image:Workbench_Part.svg|16px]] [[Part_Workbench|Part Workbench]]
# There are several ways to invoke the command:
# Invoke the Part Cylinder command several ways:
#* Press the {{Button|[[Image:Part_Cylinder.svg|16px]] Cylinder}} button in the toolbar
#* Press the {{Button|[[Image:Part_Cylinder.svg|16px]] Cylinder}} button in the toolbar.
#* Use the {{MenuCommand|Part → Primitives → Cylinder}} entry from the top menu
#* Select {{MenuCommand|Part → Primitives → [[Image:Part_Cylinder.svg|16px]] Cylinder}} entry from the top menu
#* Select {{MenuCommand|Part → Creates primitives...}} then choose {{MenuCommand|[[Image:Tree_Part_Cylinder_Parametric.svg|16px]] Cylinder}} from the Geometric Primitives task panel.



'''Result:''' The default result is for a full cylinder is to be centered by one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
'''Result:''' The default result is for a full cylinder is to be centered by one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.
Line 47: Line 49:
{{Part Tools navi{{#translation:}}}}
{{Part Tools navi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
{{clear}}

Revision as of 22:28, 11 February 2021

Part Cylinder

Menyplacering
Part → Cylinder
Arbetsbänkar
Part, Complete
Standard genväg
Ingen
Introducerad i version
-
Se även
Part CreatePrimitives

Description

Creates a simple parametric cylinder, with position, angle, radius and height parameters.

Usage

  1. Switch to the Part Workbench
  2. There are several ways to invoke the command:
    • Press the Cylinder button in the toolbar.
    • Select Part → Primitives → Cylinder entry from the top menu
    • Select Part → Creates primitives... then choose Cylinder from the Geometric Primitives task panel.


Result: The default result is for a full cylinder is to be centered by one circular face coincident with the global origin (point 0,0,0), with a radius of 2mm and height of 10mm.

Options

The properties can later be edited in the data tab for the cylinder:

a cylinder created with the Cylinder tool

Cylinder

  • Angle: The angle parameter permits the creation of a portion of cylinder (it is set to 360° by default)
  • Height: The height is the distance in the z-axis
  • Radius: The radius defines a plane in x-y.