Part CrossSections/hr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 2: Line 2:
{{Docnav
{{Docnav
|[[Part_Section|Section]]
|[[Part_Section|Section]]
|[[Part_CompOffsetTools|CompOffsetTools]]
|[[Part_Attachment|Attachment]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Section.svg
|IconL=Part_Section.svg
|IconR=Part_Attachment.svg
|IconR=Part_CompOffsetTools.png
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
}}
}}
Line 47: Line 47:
{{Docnav
{{Docnav
|[[Part_Section|Section]]
|[[Part_Section|Section]]
|[[Part_CompOffsetTools|CompOffsetTools]]
|[[Part_Attachment|Attachment]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Section.svg
|IconL=Part_Section.svg
|IconR=Part_Attachment.svg
|IconR=Part_CompOffsetTools.png
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
}}
}}

Revision as of 19:43, 1 April 2021

Part CrossSections

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Opis

The Cross-sections utility creates one or more cross-sections through the selected shape.

Kako koristiti

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Primjer

Select an object

Dialog window

Result