Part CrossSections/hr: Difference between revisions

From FreeCAD Documentation
m (FuzzyBot moved page Part SectionCross/hr to Part CrossSections/hr without leaving a redirect: Part of translatable page "Part SectionCross")
(Updating to match new version of source page)
Line 20: Line 20:
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.


<div class="mw-translate-fuzzy">
=== Kako koristiti ===
=== Kako koristiti ===
</div>


# Select a shape.
# Select a shape.

Revision as of 10:03, 9 December 2020

Part CrossSections

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Opis

The Cross-sections utility creates one or more cross-sections through the selected shape.

Kako koristiti

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Primjer

Select an object

Dialog window

Result