Part CrossSections/hr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 4: Line 4:
|[[Part_Chamfer|Chamfer]]
|[[Part_Chamfer|Chamfer]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Section.png
|IconL=Part_Section.svg
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
|IconR=Part_Chamfer.png
|IconR=Part_Chamfer.svg
}}
}}


Line 20: Line 20:
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.
The '''Cross-sections''' utility creates one or more cross-sections through the selected shape.


<div class="mw-translate-fuzzy">
=== Kako koristiti ===
=== Kako koristiti ===
</div>


# Select a shape.
# Select a shape.
Line 48: Line 50:
|[[Part_Chamfer|Chamfer]]
|[[Part_Chamfer|Chamfer]]
|[[Part_Module|Part]]
|[[Part_Module|Part]]
|IconL=Part_Section.png
|IconL=Part_Section.svg
|IconC=Workbench_Part.svg
|IconC=Workbench_Part.svg
|IconR=Part_Chamfer.png
|IconR=Part_Chamfer.svg
}}
}}



Revision as of 17:43, 15 February 2020

Part SectionCross

Menu location
Part → Cross-sections...
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part Section

Opis

The Cross-sections utility creates one or more cross-sections through the selected shape.

Kako koristiti

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Primjer

Select an object

Dialog window

Result