PartDesign PolarPattern/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Créer ===")
(Created page with "# Vous pouvez activé le bon corps. # Sélectionnez au besoin une ou plusieurs fonctions dans la Vue en arborescence ou la [...")
Line 29: Line 29:
=== Créer ===
=== Créer ===


# Optionally [[PartDesign_Body#Active_status|activate]] the correct Body.
# Vous pouvez [[PartDesign_Body#Active_status|activé]] le bon corps.
# Optionally select one or more features in the [[Tree_view|Tree view]] or the [[3D_view|3D view]].
# Sélectionnez au besoin une ou plusieurs fonctions dans la [[Tree_view/fr|Vue en arborescence]] ou la [[3D_view/fr|Vue 3D]].
# Il existe plusieurs façons de lancer l'outil :
# There are several ways to invoke the tool:
#* Press the {{Button|[[Image:PartDesign_PolarPattern.svg|16px]] [[PartDesign_PolarPattern|PolarPattern]]}} button.
#* Appuyez sur le bouton {{Button|[[Image:PartDesign_PolarPattern.svg|16px]] [[PartDesign_PolarPattern/fr|Répétition circulaire ]]}}.
#* Select the {{MenuCommand|Part Design → Apply a pattern → [[Image:PartDesign_PolarPattern.svg|16px]] PolarPattern}} option from the menu.
#* Sélectionnez l'option {{MenuCommande|Part Design → Appliquer une transformation → [[Image:PartDesign_PolarPattern.svg|16px]] Répétition circulaire }} dans le menu.
# If there is no active Body, and there are two or more Bodies in the document, the {{MenuCommand|Active Body Required}} dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
# S'il n'y a pas de corps actif, et qu'il y a deux corps ou plus dans le document, la boîte de dialogue {{MenuCommand|Corps actif requis}} s'ouvrira et vous invitera à en activer un. S'il y a un seul corps, il sera activé automatiquement.
# If no features were selected the {{MenuCommand|Select feature}} [[Task_panel|task panel]] opens: select one or more (hold down the {{KEY|Ctrl}} key) from the list and press the {{Button|OK}} button.
# Si aucune fonction n'a été sélectionnée, le [[Task_panel/fr|Panneau des tâches]] {{MenuCommand|Paramètres de la répétition circulaire}} s'ouvre : sélectionnez-en une ou plusieurs (en maintenant la touche {{KEY|Ctrl}}) dans la liste et appuyez sur le bouton {{Button|OK}}.
# The {{MenuCommand|PolarPattern parameters}} [[Task_panel|task panel]] opens. See [[#Options|Options]] for more information.
# Le [[Task_panel/fr|Panneau des tâches]] {{MenuCommand|Paramètres de la répétition linéaire}} s'ouvre. Voir [[#Options|Options]] pour plus d'informations.
# Press the {{Button|OK}} button to finish.
# Appuyez sur le bouton {{Button|OK}} pour terminer.


=== Edit ===
=== Edit ===

Revision as of 16:13, 16 June 2022

PartDesign Répétition circulaire

Emplacement du menu
Part Design → Appliquer une transformation → Répétition circulaire
Ateliers
PartDesign
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
PartDesign Transformation multiple

Description

L'outil PartDesign Répétition circulaire crée un motif polaire d'une ou plusieurs fonctions.

Une poche en forme oblongue (B) réalisée sur une protrusion (A, également appelé support) est utilisée pour un motif polaire. Le résultat (C) est illustré à droite.

Utilisation

Créer

  1. Vous pouvez activé le bon corps.
  2. Sélectionnez au besoin une ou plusieurs fonctions dans la Vue en arborescence ou la Vue 3D.
  3. Il existe plusieurs façons de lancer l'outil :
  4. S'il n'y a pas de corps actif, et qu'il y a deux corps ou plus dans le document, la boîte de dialogue Corps actif requis s'ouvrira et vous invitera à en activer un. S'il y a un seul corps, il sera activé automatiquement.
  5. Si aucune fonction n'a été sélectionnée, le Panneau des tâches Paramètres de la répétition circulaire s'ouvre : sélectionnez-en une ou plusieurs (en maintenant la touche Ctrl) dans la liste et appuyez sur le bouton OK.
  6. Le Panneau des tâches Paramètres de la répétition linéaire s'ouvre. Voir Options pour plus d'informations.
  7. Appuyez sur le bouton OK pour terminer.

Edit

  1. Do one of the following:
    • Double-click the PolarPattern object in the Tree view.
    • Right-click the PolarPattern object in the Tree view and select Edit PolarPattern from the context menu.
  2. The PolarPattern parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Options

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See Ordering features.
  • Specify the Axis of the pattern:
    • Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
    • Vertical sketch axis: The Y axis of the sketch (idem).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base X axis: The X axis of the Body.
    • Base Y axis: The Y axis of the Body.
    • Base Z axis: The Z axis of the Body.
    • Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
  • Check the Reverse direction checkbox to reverse the pattern.
  • Specify the Angle to be covered by the pattern.
  • Specify the number of Occurrences (including the original feature).
  • If the Update view checkbox is checked the view will update in real time.

Organiser les fonctions

If some of the selected features are additive and others subtractive, their order can have have an impact on the final result. You can change the order by dragging individual features in the list. introduced in version 0.19

Effet de l'ordre des fonctionnalités

Limitations

  • Any shape in the pattern that does not overlap the parent feature will be excluded. This ensures that a PartDesign Body always consists of a single, connected solid.
  • The PartDesign patterns are not yet as optimized as their Draft counterparts. So for a large number of instances you should consider using a Draft PolarArray instead, combined with a Part boolean operation. This may require major changes to your model as you are leaving PartDesign and therefore cannot simply continue with further PartDesign features in the same body. An example is shown in this Forum topic.
  • A pattern cannot be applied directly to another pattern, be it polar, linear or a mirror. For this you need a PartDesign MultiTransform.