PartDesign Simetría

From FreeCAD Documentation
Revision as of 11:32, 15 June 2021 by Stylishcp (talk | contribs) (Created page with "{{Caption|Arriba: Una operación de vaciado fue creada desde un boceto que contenía un círculo (A). Dicho vaciado fue usado posteriormente para crear una operación de Simet...")

PartDesign Simetría

Ubicación en el Menú
PartDesign → Apply a pattern → Simetría
Entornos de trabajo
PartDesign
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

La herramienta Simetría realiza una operación de simetría o espejo sobre un plano. A partir de la versión v0.17, se pueden hacer simetrías de múltiples operaciones.

Arriba: Una operación de vaciado fue creada desde un boceto que contenía un círculo (A). Dicho vaciado fue usado posteriormente para crear una operación de Simetría. El eje vertical del boceto (B) se usó como eje de simetría. El resultado se muestra a la derecha. (C)

Opciones

Cuando se crea una operación de simetría, el letrero de diálogo de 'parámetros de simetría' ofrece dos diferentes modos de especificar el plano de simetría.

Plano estándar

Uno de los planos estándar XY, YZ o XZ se pueden seleccionar con las casillas de selección.

Seleccionar una cara

Presionando el botón 'Plano' permite seleccionar una cara de un sólido pre-existente como plano de simetría. Observa que el botón debe presionarse de nuevo cada vez para seleccionar una nueva cara.

Seleccionar los originales

La lista de los 'originales', muestra las operaciones de las que se hará la simetría. Designando en cualquier operación se añadirá a la lista.

To create a mirroring:

  1. Select the feature (introduced in version 0.19 or several features) to be mirrored.
  2. Press the Mirrored button.
  3. If you have several features in the mirroring, their order can be important, see for example the image in the PolarPattern feature. introduced in version 0.19 You can change the order by dragging the feature in the list and you will see the result immediately as preview.
  4. Define the mirror Plane. See Options.
  5. Press OK.

To add or remove features from an existing mirroring:

  1. Press Add feature to add a feature to be mirrored. The feature must be visible in the 3D view:
    1. Switch to the Model tree;
    2. Select in the tree the feature to be added and press spacebar to make it visible in the 3D view;
    3. Switch back to the Tasks panel;
    4. Select the feature in the 3D view; it will be added to the list.
    5. Repeat to add other features.
  2. Press Remove feature to remove a feature from the list, or right-click on the feature in the list and select Remove.

Options

Mirrored parameters in v0.16 and below.
Mirrored parameters in v0.17 and above.

Plane

When creating a mirrored feature, the Mirrored parameters dialog offers different ways of specifying the mirror line or plane .

Horizontal sketch axis

Uses the horizontal axis of the sketch as the axis of symmetry.

Vertical sketch axis

Uses the vertical axis of the sketch as the axis of symmetry.

Select reference...

Allows you to select a plane (such as a face of an object) to use as a mirror plane .

Custom Sketch Axis

If the sketch which defines the feature to be mirrored also contains a construction line (or lines), then the drop down list will contain one custom sketch axis for each construction line. The first construction line will be labelled 'Sketch axis 0'. The image below is an example with the sketch in edit mode showing that it includes a construction line for use as the Mirrored axis.

Base (XY/XZ/YZ) plane

version 0.17 and above Select one of the Body Origin's standard planes (XY, XZ or YZ).

Preview

The mirror result can be previewed in real time before clicking OK by checking "Update view" .

Limitaciones

  • Actualmente, sólo la última operación en el árbol de operaciones se puede seleccionar como el 'original'
  • Por tanto, no es posible seleccionar más de una operación para crear la simetría
  • Por tanto, no es posible seleccionar más operaciones para añadir a la lista de los 'originales'
  • The Mirrored feature cannot mirror a whole solid body. For that, see Part Mirror .
  • The mirrored feature must intersect the solid (also called support) it is based on, or the command will fail .