PartDesign LinearPattern/fr: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "=== Éditer ===")
Line 39: Line 39:
# Appuyez sur le bouton {{Button|OK}} pour terminer.
# Appuyez sur le bouton {{Button|OK}} pour terminer.


=== Edit ===
=== Éditer ===


# Do one of the following:
# Do one of the following:

Revision as of 15:47, 16 June 2022

PartDesign Répétition linéaire

Emplacement du menu
Part Design → Appliquer une transformation → Répétition linéaire
Ateliers
PartDesign
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
PartDesign Transformation multiple

Description

L'outil PartDesign Répétition linéaire crée un motif linéaire d'une ou plusieurs fonctions.

Ci-dessus, une protrusion en forme de L (B) créée sur le dessus de la protrusion de base (A, aussi dénommée "support") est utilisée dans une répétition linéaire. Le résultat (C) est affiché à droite.

Utilisation

Créer

  1. Vous pouvez aussi activate le bon corps.
  2. Sélectionnez au besoin une ou plusieurs fonctions dans la Vue en arborescence ou la Vue 3D.
  3. Il existe plusieurs façons de lancer l'outil :
    • Appuyez sur le bouton Répétition linéaire.
    • Sélectionnez l'option Part Design → Appliquer une transformation → Répétition linéaire dans le menu.
  4. S'il n'y a pas de corps actif, et qu'il y a deux corps ou plus dans le document, la boîte de dialogue Corps actif requis s'ouvrira et vous invitera à en activer un. S'il y a un seul corps, il sera activé automatiquement.
  5. Si aucune fonction n'a été sélectionnée, le dialogue Ajouter une fonction s'ouvre. Le Panneau des tâches s'ouvre : sélectionnez-en une ou plusieurs (en maintenant la touche Ctrl) dans la liste et appuyez sur le bouton OK.
  6. Le Panneau des tâches Paramètres de la répétition linéaire s'ouvre. Voir Options pour plus d'informations.
  7. Appuyez sur le bouton OK pour terminer.

Éditer

  1. Do one of the following:
    • Double-click the LinearPattern object in the Tree view.
    • Right-click the LinearPattern object in the Tree view and select Edit LinearPattern from the context menu.
  2. The LinearPattern parameters task panel opens. See Options for more information.
  3. Press the OK button to finish.

Options

  • To add features:
    1. Press the Add feature button.
    2. Select a feature in the Tree view or the 3D view.
    3. Repeat to add more features.
  • To remove features:
    1. Press the Remove feature button.
    2. Do one of the following:
      • Select a feature in the Tree view or the 3D view.
      • Select a feature in the list and press the Del key.
      • Right-click a feature in the list and select Remove from the context menu.
    3. Repeat to remove more features.
  • If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
  • Specify the Direction of the pattern:
    • Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
    • Vertical sketch axis: The Y axis of the sketch (idem).
    • Horizontal sketch axis: The X axis of the sketch (idem).
    • Construction line #: A separate entry for each construction line in the sketch (idem).
    • Base X axis: The X axis of the Body.
    • Base Y axis: The Y axis of the Body.
    • Base Z axis: The Z axis of the Body.
    • Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
  • Check the Reverse direction checkbox to reverse the pattern.
  • Specify the Length to be covered by the pattern.
  • Specify the number of Occurrences (including the original feature).
  • If the Update view checkbox is checked the view will update in real time.

Limitations

See PartDesign PolarPattern.