Measurement Of Angles On Holes/it: Difference between revisions

From FreeCAD Documentation
(Created page with "1. Impostazione delle linee centrali sui fori:")
(Created page with "Ci sono alcune possibilità per creare una linea centrale per i fori. Prima si devono selezionare le linee o i punti sul foro come mostrato di seguito. Dopo, possono essere ut...")
Line 19: Line 19:
1. Impostazione delle linee centrali sui fori:
1. Impostazione delle linee centrali sui fori:


Ci sono alcune possibilità per creare una linea centrale per i fori.
There are some possibilities to create a center line for holes.
Prima si devono selezionare le linee o i punti sul foro come mostrato di seguito. Dopo, possono essere utilizzati i seguenti strumenti per creare la linea centrale:
At first the lines or points on the hole must be selected as shown below. Second, the following tools can be used from the toolbar to create the center line:


: [[File:TechDraw 2PointCenterLine.svg|24px]] [[TechDraw_2PointCenterLine|Add Centerline between 2 Points]]
: [[File:TechDraw 2PointCenterLine.svg|24px]] [[TechDraw_2PointCenterLine|Add Centerline between 2 Points]]

Revision as of 07:00, 19 August 2020

Other languages:
Tutorial
Argomento
TechDraw
Livello di difficoltà
Base
Tempo di esecuzione
1 minute
Autori
AnHi
Versione di FreeCAD
0.19
Files di esempio
Nessuno
Vedere anche
Nessuno

Introduzione

Questo tutorial spiega come creare linee centrali a fori orientati (assi) usando TechDraw.

Con i fori non ortigonali non è possibile utilizzare le linee centrali verticali o orizzontali (false/true) dalle proprietà della vista. Per questo è necessario creare delle linee o dei punti di supporto.

Procedura

1. Impostazione delle linee centrali sui fori:

Ci sono alcune possibilità per creare una linea centrale per i fori. Prima si devono selezionare le linee o i punti sul foro come mostrato di seguito. Dopo, possono essere utilizzati i seguenti strumenti per creare la linea centrale:

Add Centerline between 2 Points
Add Centerline between 2 Lines


Above: created with which creates centerlines between 2 points

Above: created with which creates centerlines between 2 lines

In the associated Combo View dialog box select in the Tasks panel under Orientation "Aligned" for axes out of main axes. Extend By means the length of the center line beyond of the body line in the drawing. With Shift Horizontal and Shift Vertical the center line can move in horizontal or vertical direction, if is necessary. Style means the figure of center line.




















Above: dialog box


The created center line can change. Select the center line and press the button or from the tool bar which you have created the center line. Delete the center line only with from the tool bar after selecting the center line.

2. Setting angles:

Quadrant points select with from the tool bar. Next select the points as show below and use from the tool bar to create the angle. Other succession create other angles. Is there no catching point on the center line change "ISO count" in the properties.







Above: Succession of selection

Template:Tutorials navi/it