Export to STL or OBJ/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<languages/>
<languages/>

<div class="mw-translate-fuzzy">
{{TutorialInfo/ro
{{TutorialInfo/ro
|Topic= Export to STL or OBJ
|Topic= Export to STL or OBJ
Line 8: Line 10:
|Files=
|Files=
}}
}}
</div>

== Introduction ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 16: Line 21:
Dacă nu este cazul, trebuie să vă scalați modelul.
Dacă nu este cazul, trebuie să vă scalați modelul.
</div>
</div>

== Sample part ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 29: Line 36:
</div>
</div>


== Export Method 1: Using "File → Export" ==
<div class="mw-translate-fuzzy">

==metoda 1 de Export: folosirea căii "File > Export"==
# With the default settings, this method creates a mesh with noticeably jagged curves. To get a smoother finish when e.g. 3D printing, the mesh resolution should be configured:
*Comutați pe Atelierul Mesh workbench sau workbench complet
## Make sure the [[Image:Workbench_Mesh.svg|24px]] [[Mesh_Workbench|Mesh Workbench]] has been loaded (it is not loaded by default).
*Choose {{KEY| Edit}} {{KEY| Preferences}} {{KEY| Import-Export}} {{KEY| Mesh Formats}} from the top menu
## Go to {{MenuCommand|Edit → Preferences... → Import-Export → Mesh Formats}}.
*Here you can specify the maximum mesh deviation (0,1 mm is default) which controls how "fine" your mesh will get
## Change {{MenuCommand|Maximum mesh deviation}}. A lower value will produce a mesh with a higher resolution.
*Close dialogue with {{KEY| OK}}
*Select the solid to be exported in the tree view
# Select the solid to be exported in the tree view.
*Choose {{KEY| File}} {{KEY| Export...}} and set file type to for example "STL mesh (*.stl *.ast)"
# Choose {{MenuCommand|File → Export...}} and set the file type to {{MenuCommand|STL mesh (*.stl *.ast)}}.
# Enter your file name. The default extension is {{FileName|.stl}}. You must include the extension {{FileName|.ast}} to produce an {{FileName|.ast}} file.
*Introduceți numele fișierului dvs. și nu uitați extensia, alegeți{{KEY| Save}}
# Choose {{Button|Save}}.
</div>

== Export Method 2: Using the Mesh Workbench in FreeCAD ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 52: Line 61:
*Selectați {{KEY| Save}} și ați terminat
*Selectați {{KEY| Save}} și ați terminat
</div>
</div>

== Which Method to choose ? ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 57: Line 68:
*Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la Tools din Atelierul Mesh, cum ar fi fuzionarea Plaselor înainte de export.
*Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la Tools din Atelierul Mesh, cum ar fi fuzionarea Plaselor înainte de export.
</div>
</div>

== Links ==


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
Line 66: Line 79:
{{Userdocnavi{{#translation:}}}}
{{Userdocnavi{{#translation:}}}}
[[Category:File_Formats{{#translation:}}]]
[[Category:File_Formats{{#translation:}}]]
{{clear}}

Latest revision as of 10:06, 1 December 2023

Tutorial
Topic
Export to STL or OBJ
Level
Beginner
Time to complete
20 minutes
Authors
r-frank
FreeCAD version
0.16.6703
Example files
See also
None

Introduction

Introducere

În acest tutorial vom discuta cum să exportați fișiere STL / OBJ din FreeCAD. Din moment ce formatul STL / OBJ-ul este compus din ochiuri este adimensional, FreeCAD va presupune că unitățile utilizate în model sunt în mm. Dacă nu este cazul, trebuie să vă scalați modelul.

Sample part

Model de Piesă

Puteți utiliza propriul fișier FreeCAD, dar puteți crea, de asemenea, un fișier de test rapid de către

  • Creați un nou document
  • Comutați pe Atelierul Part
  • Insert a cube by clicking on
  • Insert a cone by clicking on
  • Select all two objects in the tree view
  • Apply a fusion by clicking on
  • Salvați fișierul

Export Method 1: Using "File → Export"

  1. With the default settings, this method creates a mesh with noticeably jagged curves. To get a smoother finish when e.g. 3D printing, the mesh resolution should be configured:
    1. Make sure the Mesh Workbench has been loaded (it is not loaded by default).
    2. Go to Edit → Preferences... → Import-Export → Mesh Formats.
    3. Change Maximum mesh deviation. A lower value will produce a mesh with a higher resolution.
  2. Select the solid to be exported in the tree view.
  3. Choose File → Export... and set the file type to STL mesh (*.stl *.ast).
  4. Enter your file name. The default extension is .stl. You must include the extension .ast to produce an .ast file.
  5. Choose Save.

Export Method 2: Using the Mesh Workbench in FreeCAD

Metoda 2 de Export: folosirea atelierului Plase în FreeCAD

  • Comutați pe Atelierul Mesh
  • Selectați în vederea arborescentă solidul care va fi transformat în plasă
  • Choose Meshes Create Mesh from shape... from the top menu
  • Select one of the three available meshers and specify the available options, for more info refer to this page (Mesh from Shape)
  • Choose OK and the mesh object will be created in the tree view (with green mesh icon)
  • Select the mesh object in the tree view and right click on mesh object in the tree view
  • Choose Export mesh to export mesh
  • You will be prompted to choose file name (default is the name of the mesh object) and the file type (default is "Binary STL (*.stl)")
  • Selectați Save și ați terminat

Which Method to choose ?

Care metodă alegem?

  • Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la Tools din Atelierul Mesh, cum ar fi fuzionarea Plaselor înainte de export.

Links