Export to STL or OBJ/ro: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>

{{TutorialInfo
<div class="mw-translate-fuzzy">
{{TutorialInfo/ro
|Topic= Export to STL or OBJ
|Topic= Export to STL or OBJ
|Level= Beginner
|Level= Beginner
Line 8: Line 10:
|Files=
|Files=
}}
}}
</div>


== Introduction ==

<div class="mw-translate-fuzzy">
== Introducere ==
== Introducere ==
În acest tutorial vom discuta cum să exportați fișiere STL / OBJ din FreeCAD.
În acest tutorial vom discuta cum să exportați fișiere STL / OBJ din FreeCAD.
Line 14: Line 20:
unitățile utilizate în model sunt în mm.
unitățile utilizate în model sunt în mm.
Dacă nu este cazul, trebuie să vă scalați modelul.
Dacă nu este cazul, trebuie să vă scalați modelul.
</div>


== Sample part ==

<div class="mw-translate-fuzzy">
== Model de Piesă ==
== Model de Piesă ==
Puteți utiliza propriul fișier FreeCAD, dar puteți crea, de asemenea, un fișier de test rapid de către
Puteți utiliza propriul fișier FreeCAD, dar puteți crea, de asemenea, un fișier de test rapid de către
Line 24: Line 34:
*Apply a fusion by clicking on [[Image:Part_Fuse.png|32px]]
*Apply a fusion by clicking on [[Image:Part_Fuse.png|32px]]
*Salvați fișierul
*Salvați fișierul
</div>


==Export Method 1: folosirea căii "File > Export"==
== Export Method 1: Using "File Export" ==
*Switch to mesh workbench or complete workbench
*Choose {{KEY| Edit}} {{KEY| Preferences}} {{KEY| Import-Export}} {{KEY| Mesh Formats}} from the top menu
*Here you can specify the maximum mesh deviation (0,1 mm is default) which controls how "fine" your mesh will get
*Close dialogue with {{KEY| OK}}
*Select the solid to be exported in the tree view
*Choose {{KEY| File}} {{KEY| Export...}} and set file type to for example "STL mesh (*.stl *.ast)"
*Type in your file name and don't forget the extension, choose {{KEY| Save}}


# With the default settings, this method creates a mesh with noticeably jagged curves. To get a smoother finish when e.g. 3D printing, the mesh resolution should be configured:
==Export Method 2: folosirea atelierului Plase in FreeCAD==
## Make sure the [[Image:Workbench_Mesh.svg|24px]] [[Mesh_Workbench|Mesh Workbench]] has been loaded (it is not loaded by default).
*Switch to mesh workbench
## Go to {{MenuCommand|Edit → Preferences... → Import-Export → Mesh Formats}}.
*Select the solid to be meshed in the tree view
## Change {{MenuCommand|Maximum mesh deviation}}. A lower value will produce a mesh with a higher resolution.
# Select the solid to be exported in the tree view.
# Choose {{MenuCommand|File → Export...}} and set the file type to {{MenuCommand|STL mesh (*.stl *.ast)}}.
# Enter your file name. The default extension is {{FileName|.stl}}. You must include the extension {{FileName|.ast}} to produce an {{FileName|.ast}} file.
# Choose {{Button|Save}}.

== Export Method 2: Using the Mesh Workbench in FreeCAD ==

<div class="mw-translate-fuzzy">
==Metoda 2 de Export: folosirea atelierului Plase în FreeCAD==
*Comutați pe Atelierul Mesh
*Selectați în vederea arborescentă solidul care va fi transformat în plasă
*Choose {{KEY| Meshes}} → {{KEY|[[Image:Mesh_Mesh_from_Shape.svg|32px]] Create Mesh from shape...}} from the top menu
*Choose {{KEY| Meshes}} → {{KEY|[[Image:Mesh_Mesh_from_Shape.svg|32px]] Create Mesh from shape...}} from the top menu
*Select one of the three available meshers and specify the available options, for more info refer to [[Mesh MeshFromShape|this page (Mesh from Shape)]]
*Select one of the three available meshers and specify the available options, for more info refer to [[Mesh MeshFromShape|this page (Mesh from Shape)]]
Line 43: Line 59:
*Choose {{KEY|[[Image:Mesh_ExportMesh.png|32px]] Export mesh}} to export mesh
*Choose {{KEY|[[Image:Mesh_ExportMesh.png|32px]] Export mesh}} to export mesh
*You will be prompted to choose file name (default is the name of the mesh object) and the file type (default is "Binary STL (*.stl)")
*You will be prompted to choose file name (default is the name of the mesh object) and the file type (default is "Binary STL (*.stl)")
*Choose {{KEY| Save}} and you are finished
*Selectați {{KEY| Save}} și ați terminat
</div>

== Which Method to choose ? ==

<div class="mw-translate-fuzzy">
==Care metodă alegem?==
*Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la Tools din Atelierul Mesh, cum ar fi fuzionarea Plaselor înainte de export.
</div>


==Care metodă e de ales?==
== Links ==
*Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la unelte la altul, cum ar fi fuzionarea ochiurilor înainte de export.


<div class="mw-translate-fuzzy">
==Links==
==Links==
* [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
* [[Import_from_STL_or_OBJ|Import from STL or OBJ]]
</div>




{{Userdocnavi{{#translation:}}}}
{{clear}}
[[Category:File_Formats{{#translation:}}]]

Latest revision as of 10:06, 1 December 2023

Tutorial
Topic
Export to STL or OBJ
Level
Beginner
Time to complete
20 minutes
Authors
r-frank
FreeCAD version
0.16.6703
Example files
See also
None

Introduction

Introducere

În acest tutorial vom discuta cum să exportați fișiere STL / OBJ din FreeCAD. Din moment ce formatul STL / OBJ-ul este compus din ochiuri este adimensional, FreeCAD va presupune că unitățile utilizate în model sunt în mm. Dacă nu este cazul, trebuie să vă scalați modelul.

Sample part

Model de Piesă

Puteți utiliza propriul fișier FreeCAD, dar puteți crea, de asemenea, un fișier de test rapid de către

  • Creați un nou document
  • Comutați pe Atelierul Part
  • Insert a cube by clicking on
  • Insert a cone by clicking on
  • Select all two objects in the tree view
  • Apply a fusion by clicking on
  • Salvați fișierul

Export Method 1: Using "File → Export"

  1. With the default settings, this method creates a mesh with noticeably jagged curves. To get a smoother finish when e.g. 3D printing, the mesh resolution should be configured:
    1. Make sure the Mesh Workbench has been loaded (it is not loaded by default).
    2. Go to Edit → Preferences... → Import-Export → Mesh Formats.
    3. Change Maximum mesh deviation. A lower value will produce a mesh with a higher resolution.
  2. Select the solid to be exported in the tree view.
  3. Choose File → Export... and set the file type to STL mesh (*.stl *.ast).
  4. Enter your file name. The default extension is .stl. You must include the extension .ast to produce an .ast file.
  5. Choose Save.

Export Method 2: Using the Mesh Workbench in FreeCAD

Metoda 2 de Export: folosirea atelierului Plase în FreeCAD

  • Comutați pe Atelierul Mesh
  • Selectați în vederea arborescentă solidul care va fi transformat în plasă
  • Choose Meshes Create Mesh from shape... from the top menu
  • Select one of the three available meshers and specify the available options, for more info refer to this page (Mesh from Shape)
  • Choose OK and the mesh object will be created in the tree view (with green mesh icon)
  • Select the mesh object in the tree view and right click on mesh object in the tree view
  • Choose Export mesh to export mesh
  • You will be prompted to choose file name (default is the name of the mesh object) and the file type (default is "Binary STL (*.stl)")
  • Selectați Save și ați terminat

Which Method to choose ?

Care metodă alegem?

  • Se preferă metoda 2. Mai ales atunci când aveți mai multe corpuri pentru a converti de la Tools din Atelierul Mesh, cum ar fi fuzionarea Plaselor înainte de export.

Links