CAM ToolController/ru: Difference between revisions
(Updating to match new version of source page) |
m (FuzzyBot moved page Path ToolController/ru to CAM ToolController/ru without leaving a redirect: Part of translatable page "Path ToolController") |
(No difference)
|
Revision as of 19:42, 16 March 2024
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
Описание
A tool controller carries properties for how a tool should be used in one or more operations.
For example a tool, like a 1/4 inch cutter can run at many different spindle speeds and feed rates. The same tool might be used in different ways in the same job.
Properties
- feed speed (h)
- feed speed (v)
- rapid speed (h)
- rapid speed (v)
- Spindle Speed (rpm)
- Spindle direction (forward/reverse)
- Tool Number
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework