CAM Pocket Shape/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 16: Line 16:
This tool creates a pocketing operation from selected bottom faces or walls of one ore more pockets of the jobs base object.
This tool creates a pocketing operation from selected bottom faces or walls of one ore more pockets of the jobs base object.


The Path Pocket object is made to be part of a [[Path Job]].
The Path Pocket Shape object is made to be part of a [[Path Job]].


[[Image:Path_Pocket_Shape.png]]
[[Image:Path_Pocket_Shape.png|600px]]


==Usage==
==Usage==
Line 28: Line 28:
==Properties==
==Properties==


''' ''Note'' ''': Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.
====Base Geometry====


====Base====
* Add, if not allready done, the elements which should be the base for the path
Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.
** you can also delete or change to other elements


* {{PropertyData|Placement}}: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
====Depth====
** {{PropertyData|Angle}}: Angle in degrees applied to rotation of the object around Axis property value
** {{PropertyData|Axis}}: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
*** {{PropertyData|X}}: x axis value
*** {{PropertyData|Y}}: y axis value
*** {{PropertyData|Z}}: z axis value
** {{PropertyData|Position}}: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
*** {{PropertyData|X}}: x distance value
*** {{PropertyData|Y}}: y distance value
*** {{PropertyData|Z}}: z distance value
* {{PropertyData|Label}}: User-provided name of the object (UTF-8)


====Depth====
* {{PropertyData|Start Depth}}: Starting Depth of Tool- starting depth in Z
* {{PropertyData|Final Depth}}: Final Depth of Tool- lowest cutting level in Z
* {{PropertyData|Finish Depth}}: The hight of the last cutting level- set for a better finish
* {{PropertyData|Step Down}}: Step Down of Tool- the amount of material which will be removed at once


====Height====

* {{PropertyData|Safe Height}}: The hight above the workpeace where rapid motions are allowed.
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions
* {{PropertyData|Clearance Height}}: The height needed to clear clamps and obstructions
* {{PropertyData|Final Depth}}: Final Depth of Tool- lowest value in Z
* {{PropertyData|Finish Depth}}: Maximum material removed on final pass. The height (thickness) of the last cutting level - ''set for a better finish''.
* {{PropertyData|Safe Height}}: The height above which Rapid motions are allowed. (Rapid safety height between locations)
* {{PropertyData|Start Depth}}: Starting depth of Tool - ''first cut depth in Z''
* {{PropertyData|Step Down}}: Incremental step down of Tool during operation
[[File:Path-DepthsAndHeights.gif|center]]
{{Caption|Visual reference for Depth properties (settings)}}


====Operation====


====Extension====

* {{PropertyData|Extension Corners}}: When enabled connected extension edges are combined to wires.
* {{PropertyData|Extension Length Default}}: Default length of extensions.

====Face====

* {{PropertyData|Offset Pattern}}: Clearing pattern to use. (Select in which manner the horizontal movements should be done.)

====Path====

* {{PropertyData|Active}}: make False, to prevent operation from generating code
* {{PropertyData|Comment}}: An optional comment for this Operation
* {{PropertyData|User Label}}: User assigned label
* {{PropertyData|Tool Controller}}: Defines the Tool controller used in the Operation
* {{PropertyData|Tool Controller}}: Defines the Tool controller used in the Operation

====Pocket====

* {{PropertyData|Cut Mode}}: Specifies a CW or CCW move for the cut
* {{PropertyData|Cut Mode}}: Specifies a CW or CCW move for the cut
* {{PropertyData|Extra Offset}}: Extra offset to apply to the operation. Direction is operation dependent. (Extra value to stay away from final profile- ''good for roughing toolpath'')
* {{PropertyData|Pattern}}: Select on which manner the horizontal movements should be done
* {{PropertyData|Angle}}: Select the path angle relativ to x axis
* {{PropertyData|Keep Tool Down}}: Attempts to avoid unnecessary retractions.
* {{PropertyData|Step Over Percent}}: Select the horizontal step over- 100% = tool diameter
* {{PropertyData|Min Travel}}: Use 3D Sorting of Path (when multiple base geometries used).
* {{PropertyData|Pass Extension}}:
* {{PropertyData|Start At}}: Start pocketing at center or boundary
* {{PropertyData|Step Over}}: Select the horizontal step over ('''Percent''' of tool diameter: 100% = tool diameter)
* {{PropertyData|Use Outline}}: Uses the outline of the base geometry.
* {{PropertyData|Zig Zag Angle}}: Angle of the zigzag pattern. (Select the path angle relative to X axis.)

====Rotation====

* {{PropertyData|Attempt Inverse Angle}}: Automatically attempt Inverse Angle if initial rotation is incorrect.
* <s>{{PropertyData|B_Axis Error Override}}: Visually orient B(y) rotations to model (error in FreeCAD rendering).</s>
* {{PropertyData|Enable Rotation}}: Enable rotation to gain access to pockets or areas not normal to Z axis.
* {{PropertyData|Inverse Angle}}: Inverse the angle of the rotation. '' '''Example:''' change a rotation from -22.5 to 22.5 degrees.''
* {{PropertyData|Reverse Direction}}: Reverse orientation of Operation by 180 degrees.

====Start Point====

* {{PropertyData|Start Point}}: The start point of this path
* {{PropertyData|Use Start Point}}: make True, if manually specifying a Start Point, then enter Start Points in the property data Start Points field


==Tasks Window Editor Layout==
''Descriptions for the settings are provided in the Properties list above.''
This section is simply a layout map of the settings in the window editor for the Operation.

====Base Geometry====

* '''Add''': adds selected element(s) which should be the base(s) for the path(s)
* '''Delete''': delete the selected item(s) in the Base Geometry list
* '''Clear''': clear all items in the Base Geometry list

====Extensions====

* {{PropertyData|Show All}}: If selected, all potential extensions are visualized. Enabled extensions in purple, disabled extensions in yellow.
* {{PropertyData|Extension Corners}}
* {{PropertyData|Extension Length Default}}
* '''Enable'''
* '''Disable'''
* '''Clear'''

====Depth====

* {{PropertyData|Start Depth}}
* {{PropertyData|Final Depth}}
* {{PropertyData|Step Down}}

====Height====


* {{PropertyData|Safe Height}}
* {{PropertyData|Clearance Height}}


====Operation====
[[File:Path-DepthsAndHeights.gif]]
{{Caption|Description of the properties of the pocket shape tool}}


* {{PropertyData|Tool Controller}}
* {{PropertyData|Cut Mode}}
* {{PropertyData|Pattern}} (Offset Pattern)
* {{PropertyData|Angle}} (Zig Zag Angle)
* {{PropertyData|Step Over Percent}} (Step Over)
* {{PropertyData|Pass Extension}}: The distance the facing operation will extend beyond the <u>boundary shape</u> (base geometry)





Revision as of 21:32, 16 June 2019

Path Pocket

Системное название
Path Pocket
Расположение в меню
Путь → Новые операции → Карман
Верстаки
Path
Быстрые клавиши
P,O
Представлено в версии
-
См. также
Нет

Description

This tool creates a pocketing operation from selected bottom faces or walls of one ore more pockets of the jobs base object.

The Path Pocket Shape object is made to be part of a Path Job.

Usage

  1. Select the bottom or the wall(s) of a pocket. While it is usually easier to select the bottom, the walls have to be selected when a pocket goes through all.
  2. Press the Pocket Shape button
  3. Adjust the desired properties

Properties

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the Path Job model as needed.

  • ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
    • ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
    • ДанныеAxis: Axis(one or multiple) around which to rotate the object, set in sub-properties: x, y, z
      • ДанныеX: x axis value
      • ДанныеY: y axis value
      • ДанныеZ: z axis value
    • ДанныеPosition: Position of the object, set in sub-properties: x, y, z - with respect to the origin (or origin of parent object container)
      • ДанныеX: x distance value
      • ДанныеY: y distance value
      • ДанныеZ: z distance value
  • ДанныеLabel: User-provided name of the object (UTF-8)

Depth

  • ДанныеClearance Height: The height needed to clear clamps and obstructions
  • ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
  • ДанныеFinish Depth: Maximum material removed on final pass. The height (thickness) of the last cutting level - set for a better finish.
  • ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
  • ДанныеStart Depth: Starting depth of Tool - first cut depth in Z
  • ДанныеStep Down: Incremental step down of Tool during operation

Visual reference for Depth properties (settings)


Extension

  • ДанныеExtension Corners: When enabled connected extension edges are combined to wires.
  • ДанныеExtension Length Default: Default length of extensions.

Face

  • ДанныеOffset Pattern: Clearing pattern to use. (Select in which manner the horizontal movements should be done.)

Path

  • ДанныеActive: make False, to prevent operation from generating code
  • ДанныеComment: An optional comment for this Operation
  • ДанныеUser Label: User assigned label
  • ДанныеTool Controller: Defines the Tool controller used in the Operation

Pocket

  • ДанныеCut Mode: Specifies a CW or CCW move for the cut
  • ДанныеExtra Offset: Extra offset to apply to the operation. Direction is operation dependent. (Extra value to stay away from final profile- good for roughing toolpath)
  • ДанныеKeep Tool Down: Attempts to avoid unnecessary retractions.
  • ДанныеMin Travel: Use 3D Sorting of Path (when multiple base geometries used).
  • ДанныеStart At: Start pocketing at center or boundary
  • ДанныеStep Over: Select the horizontal step over (Percent of tool diameter: 100% = tool diameter)
  • ДанныеUse Outline: Uses the outline of the base geometry.
  • ДанныеZig Zag Angle: Angle of the zigzag pattern. (Select the path angle relative to X axis.)

Rotation

  • ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
  • ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
  • ДанныеEnable Rotation: Enable rotation to gain access to pockets or areas not normal to Z axis.
  • ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
  • ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Start Point

  • ДанныеStart Point: The start point of this path
  • ДанныеUse Start Point: make True, if manually specifying a Start Point, then enter Start Points in the property data Start Points field


Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above. This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

  • Add: adds selected element(s) which should be the base(s) for the path(s)
  • Delete: delete the selected item(s) in the Base Geometry list
  • Clear: clear all items in the Base Geometry list

Extensions

  • ДанныеShow All: If selected, all potential extensions are visualized. Enabled extensions in purple, disabled extensions in yellow.
  • ДанныеExtension Corners
  • ДанныеExtension Length Default
  • Enable
  • Disable
  • Clear

Depth

  • ДанныеStart Depth
  • ДанныеFinal Depth
  • ДанныеStep Down

Height

  • ДанныеSafe Height
  • ДанныеClearance Height

Operation

  • ДанныеTool Controller
  • ДанныеCut Mode
  • ДанныеPattern (Offset Pattern)
  • ДанныеAngle (Zig Zag Angle)
  • ДанныеStep Over Percent (Step Over)
  • ДанныеPass Extension: The distance the facing operation will extend beyond the boundary shape (base geometry)


Template:Path Tools navi