Assembly4 Workbench/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "== Совместимость ==")
(Created page with "==Ссылки==")
Line 19: Line 19:
Assembly4 was inspired by [[Image:A2p_workbench.svg|24px]] [[A2plus_Workbench|A2plus]] and [[Assembly3_Workbench|Assembly3]] but it is not compatible with them. If you have older models made in those two workbenches, you should use those workbenches to open your models only.
Assembly4 was inspired by [[Image:A2p_workbench.svg|24px]] [[A2plus_Workbench|A2plus]] and [[Assembly3_Workbench|Assembly3]] but it is not compatible with them. If you have older models made in those two workbenches, you should use those workbenches to open your models only.


== Links ==
==Ссылки==


* [[App_Link|App Link]] object that makes Assembly3 and Assembly4 work.
* [[App_Link|App Link]] object that makes Assembly3 and Assembly4 work.

Revision as of 21:10, 2 May 2020

Other languages:

The FreeCAD Assembly4 External Workbench Icon

Введение

Assembly4 is an external workbench that is used to perform assembly of different bodies contained in a single file or in multiple documents. It was created in the v0.19 development cycle to take advantage of Assembly3's new features.

It was developed with the idea that a true constraint solver was not needed, and instead the expression engine was enough to establish relationships between different bodies.

Установка

Совместимость

Assembly4 was developed from the new tools created for Assembly3, in particular, the App Link object and the improved expression engine.

Assembly4 was inspired by A2plus and Assembly3 but it is not compatible with them. If you have older models made in those two workbenches, you should use those workbenches to open your models only.

Ссылки