표준 개체 선택 상자(Std BoxSelection)

From FreeCAD Documentation
Revision as of 07:55, 30 December 2020 by Saltsalt (talk | contribs) (Created page with "==비고==")

Std BoxSelection

메뉴 위치
편집 → 개체 선택
작업대
모두
기본 단축키
Shift+B
도입 버전
-
참조
표준 면 선택, 표준 모두 선택

설명

표준 개체 선택 상자(Std BoxSelection) 명령은 3D 보기에 사용자 정의 사각 영역 즉 상자를 그려 개체를 선택합니다.

용법

  1. 이 명령을 실행하는 방법은 여러 가지 입니다:
    • 메뉴에서 편집 → 개체 선택 상자 옵션을 선택합니다.
    • 단축키를 사용합니다: Shift+B.
  2. 아래 중 하나를 실행합니다:
    • 선택하려는 개체의 기하학적 중심이 포함되도록 왼쪽에서 오른쪽으로 사각형을 드래그하여 그립니다.
    • 선택하려는 개체의 경계 상자가 (일부) 포함되도록 오른쪽에서 왼쪽으로 사각형을 드래그하여 그립니다.

비고

  • Use the Std BoxElementSelection command to box select faces instead of objects.
  • This command cannot be used to select elements in a sketch. To 'box select' when the Sketcher Dialog is open:
    1. Make sure that no command is active.
    2. Do one of the following:
      • Click in an empty area and drag a rectangle from left to right to select objects that lie completely inside the rectangle.
      • Click in an empty area and drag a rectangle from right to left to also select objects that touch or cross the rectangle.