PartDesign Субтрактивная Призма
Субтрактивная призма |
Системное название |
---|
PartDesign_SubtractivePrism |
Расположение в меню |
Part Design → Создать субтрактивный примитив → Субтрактивная призма |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Создать субтрактивный примитив, Аддитивная призма |
Описание
Inserts a subtractive prism in the active Body. Its shape is subtracted from the existing solid.
On the left: active body (A) shown in grey and subtractive prism (B) shown in transparent red; result on the right.
Применение
- Press the Subtractive Prism button. Note: the Subtractive Prism is part of an icon menu labelled Create an subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Prism, click on the down arrow besides the visible icon and select Subtractive Prism in the menu.
- Set the Primitive parameters and Attachment.
- Click OK.
- A Prism feature appears under the active Body.
Опции
It is possible to create skewed prisms by specifying angles in respect to the normal vector of the chosen attachment. introduced in version 0.19
Параметры Призмы после её создания можно изменить двумя способами:
- Дважды щелкнув по ней в дереве модели или щелкнув правой кнопкой мыши и выбрав Редактировать примитив в контекстном меню; это откроет окно параметров примитива.
- Через Редактор свойств.
Свойства
- ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
- ДанныеLabel: label given to the Prism object. Change to suit your needs.
- ДанныеPolygon: number of sides in the polygon cross-section of the prism.
- ДанныеCircumradius: circumscribed radius of the polygon cross-section of the prism.
- ДанныеHeight: height of the prism.
- ДанныеFirst Angle: angle in first direction. introduced in version 0.19
- ДанныеSecond Angle: angle in second direction. introduced in version 0.19
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework