Модуль Arch
Робочий простір Архітектора (Arch workbench) забезпечує сучасний BIM робочий процес до FreeCAD, з підтримкою таких функцій як:
- підтримка IFC
- повністю параметричні архітектурні об'єкти такі як стіни, елементи конструкцій або вікна
- можливості для створення 2D документів.
Робочий простір Arch вміщює всі інструменти з Робочого простору Draft.
The Arch Workbench includes all tools from the Draft Workbench as it uses 2D shapes as the base geometry to create architectural objects in 3D space. Sketches can also be used to define the base geometry of certain elements like doors and windows. The Arch Workbench can also use solid objects created with other workbenches like Part and PartDesign. In this case, the Arch tools set up an information layer on top of the existing solids, so that the solids can be correctly exported to IFC files.
The architectural capabilities of FreeCAD are augmented with the BIM Workbench, which includes this Arch Workbench as well as other tools to make building modelling more intuitive and user-friendly. The BIM Workbench is currently experimental and can be installed from the Addon Manager via the menu Tools → Addon manager → BIM.
Інструменти
These are tools for creating architectural objects.
Wall: Creates a wall from scratch or using a selected object as a base
Structural element: Creates a structural element from scratch or using a selected object as a base
- Rebar tools
Straight Rebar: Creates a Straight reinforcement bar in a selected structural element
UShape Rebar: Creates a UShape reinforcement bar in a selected structural element
LShape Rebar: Creates a LShape reinforcement bar in a selected structural element
Bent Shape Rebar: Creates a Bent Shape reinforcement bar in a selected structural element
Stirrup Rebar: Creates a Stirrup reinforcement bar in a selected structural element
Helical Rebar: Creates a Helical reinforcement bar in a selected structural element
Rebar: Creates a custom reinforcement bar in a selected structural element using a sketch
Floor: Creates a floor including selected objects
Building Part: Creates a building part including selected objects
Building: Creates a building including selected objects
Site: Creates a site including selected objects
Window: Creates a window using a selected object as a base
Section Plane: Adds a section plane object to the document
- Axis tools
Axis: Adds a 1-direction array of axes to the document
Axes system: Adds an axes system composed of several axes to the document
Grid: Adds a grid-like object to the document
Roof: Creates a sloped roof from a selected face
Space: Creates a space object in the document
Stairs: Creates a stairs object in the document
- Panel tools
Panel: Creates a panel object from a selected 2D object
Panel Cut: Creates a 2D cut view from a panel introduced in version 0.17
Panel Sheet: Creates a 2D cut sheet including panel cuts or other 2D objects introduced in version 0.17
Nest: Allow to nest several flat objects inside a container shape introduced in version 0.17
Frame: Creates a frame object from a selected layout
Equipment: Creates an equipment or furniture object
- Pipe tools introduced in version 0.17
Pipe: Creates a pipe introduced in version 0.17
Pipe Connector: Creates a corner or tee connection between 2 or 3 selected pipes introduced in version 0.17
- Material tools
Material: Creates a material and attributes it to selected objects, if any
Multi-Material: Creates a multi-material and attributes it to selected objects, if any introduced in version 0.17
Schedule: Creates different types of schedules
Modification tools
These are tools for modifying architectural objects.
Cut with plane: Cut an object according to a plane.
Add component: Adds objects to a component
Remove component: Subtracts or removes objects from a component
Survey: Enters or leaves surveying mode
Utilities
These are additional tools to help you in specific tasks.
Component: Creates a non-parametric Arch component
- File:Arch cloneComponent.png Clone component:
Split Mesh: Splits a selected mesh into separate components
Mesh To Shape: Converts a mesh into a shape, unifying coplanar faces
Select non-solid meshes: Selects all non-solid meshes from the current selection or frm the document
Remove Shape: Turns cubic shape-based arch object fully parametric
Close Holes: Closes holes in a selected shape-based object
- File:Arch MergeWalls.png Merge Walls: Merge two or more walls
Check: Check if the selected objects are solids and don't contain defects
Ifc Explorer: Browse the contents of an IFC file
Toggle IFC Brep flag: Forces a selected object to be exported as an IfcFacetedBrep.
3 Views from mesh: Creates top, frontal and side views from a mesh.
Create IFC spreadsheet...:
- File:Arch ToggleSubs.png Toggle Subcomponents: Shows or hides the subcomponents of an Arch object.
Preferences
Preferences: preferences for the default appearance of walls, structures, rebars, windows, stairs, panels, pipes, grids and axes.
Формати файлів
API
Архітектурний модуль Arch може бути використаний в сценаріях на мові Python або макросах за допомогою функцій Arch Python API.
Посібники