Workbenches/ja: Difference between revisions

From FreeCAD Documentation
(Created page with "FreeCADでは同じ考え方を採用しています。関係する作業に従ってツールはワークベンチにグループ化されているのです。")
(Created page with "今のところ以下のワークベンチが利用可能になっています: {{workbenches/jp}} 複数の新しいワークベンチが開発中です。お楽しみに!")
Line 4: Line 4:
FreeCADでは同じ考え方を採用しています。関係する作業に従ってツールはワークベンチにグループ化されているのです。
FreeCADでは同じ考え方を採用しています。関係する作業に従ってツールはワークベンチにグループ化されているのです。


今のところ以下のワークベンチが利用可能になっています:
When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and possibly other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.

{{workbenches/jp}}

複数の新しいワークベンチが開発中です。お楽しみに!


Note that sometimes a Workbench is referred to as a ''Module''. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.
Note that sometimes a Workbench is referred to as a ''Module''. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Revision as of 13:14, 13 December 2018

RevitCatiaといった多くの現代的なデザインのためのアプリケーションと同様、FreeCADはワークベンチというコンセプトを基盤にしています。ワークベンチとは言うなれば特定の作業のために特別に編成されたツールのセットです。伝統的な家具工房では木材を扱う者のための作業台や金属部品を扱う者のための作業台があり、恐らくは全ての部品を一つに組み立てる者のための作業台もあったことでしょう。

FreeCADでは同じ考え方を採用しています。関係する作業に従ってツールはワークベンチにグループ化されているのです。

今のところ以下のワークベンチが利用可能になっています:

Template:Workbenches/jp

複数の新しいワークベンチが開発中です。お楽しみに!

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Built-in workbenches

The following workbenches are available on every FreeCAD installation:

  • The Arch Workbench for working with architectural elements.
  • The Complete Workbench hold all commands and features from all the modules and workbenches which met certain quality criteria. Deprecated in v0.17
  • The Draft Workbench contains 2D tools and basic 2D and 3D CAD operations.
  • The Drawing Workbench for displaying your 3D work on a 2D sheet.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.

External workbenches

FreeCAD workbenches are easy to program in Python, there are therefore many people developing additional workbenches outside of the FreeCAD main developers.

The external workbenches page has some information and tutorials on some of them, and the FreeCAD Addons project aims at gathering them and making them easily installable from within FreeCAD.

New workbenches are in development, stay tuned!

Property editor
PartDesign Workbench