Sketcher ReorientSketch/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "#在树状视图中选择待重定位的草图 #从顶级菜单中选择{{KEY| Sketch}} → {{KEY| Reorient sketch}} #这时会弹出一个菜单,问您是否将选中的...")
(Created page with "==备注==")
Line 23: Line 23:
#您还可以为之添加一个正/负偏移值
#您还可以为之添加一个正/负偏移值


==Notes==
==备注==


* When selecting {{KEY| Cancel}} in the second menu the sketch is simply detached from its face.
* When selecting {{KEY| Cancel}} in the second menu the sketch is simply detached from its face.

Revision as of 09:39, 10 July 2019

Sketcher Reorient

Menu location
Part design → Reorient sketch
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
-
See also
Map sketch, New Sketch

描述

借助此工具,您可以将一个草图从原来的面上分离开来,再将其(以一个偏移值)附于一个主平面上。

如何使用

  1. 在树状视图中选择待重定位的草图
  2. 从顶级菜单中选择 Sketch Reorient sketch
  3. 这时会弹出一个菜单,问您是否将选中的草图从所在的面上分离出来
  4. 选择 Yes将显示与 Sketch New Sketch相同的菜单
  5. 此时,您可以将此草图附于一个主平面之上
  6. 您还可以为之添加一个正/负偏移值

备注

  • When selecting Cancel in the second menu the sketch is simply detached from its face.
  • As long as no sketch is selected, the command is greyed out.