Sketcher CreatePointFillet/fr: Difference between revisions

From FreeCAD Documentation
(Created page with "Sketcher Congé avec contrainte")
 
(Created page with "Cet outil crée un congé entre deux lignes. L'intersection (virtuelle) des lignes est préservée en ajoutant un point qui a un Sketcher_Constra...")
Line 21: Line 21:
== Description ==
== Description ==


This tool creates a fillet between two lines. The (virtual) intersection of the lines is preserved by adding a [[Sketcher_CreatePoint|point]] that has a [[Sketcher_ConstrainPointOnObject|point onto object constraint]] with both lines. Apart from that this tool is identical to the [[Sketcher_CreateFillet|Sketcher CreateFillet]] tool. See there for more information.
Cet outil crée un congé entre deux lignes. L'intersection (virtuelle) des lignes est préservée en ajoutant un [[Sketcher_CreatePoint/fr|point]] qui a un [[Sketcher_ConstrainPointOnObject/fr|point sur la contrainte de l'objet]] avec les deux lignes. À part cela, cet outil est identique à l'outil [[Sketcher_CreateFillet/fr|Sketcher Congé]]. Voir cet outil pour plus d'informations.





Revision as of 20:32, 30 September 2022

Other languages:

Sketcher CreatePointFillet

Menu location
Sketch → Sketcher geometries → Create corner-preserving fillet
Workbenches
Sketcher
Default shortcut
G F P
Introduced in version
0.19
See also
Sketcher CreateFillet

Description

Cet outil crée un congé entre deux lignes. L'intersection (virtuelle) des lignes est préservée en ajoutant un point qui a un point sur la contrainte de l'objet avec les deux lignes. À part cela, cet outil est identique à l'outil Sketcher Congé. Voir cet outil pour plus d'informations.