零件环面

From FreeCAD Documentation
Revision as of 15:23, 19 July 2019 by Wconly (talk | contribs) (Created page with "File:TorusExampleRadius1.jpg 将Radius1的值指定为20 mm。")

Part Torus

Menu location
Part → Torus
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

描述

根据position, angle1, angle2, angle3, radius1 与 radius2参数创建一个简单的参数化环面。

如何使用

零件工作台中点击环面图标。这会在原点(point 0,0,0)处创建一个环面。 三个角度参数(angle1, angle2, angle3)与两个半径参数(radius1 , radius2)用于确定参数化环面,详情请看下段文字。

选项

参数

创建环面的过程就相当于令一个小圆盘沿一个幻想的环形轨道为轴进行圆周运动。这样,就可以通过下列参数来定义参数化环面:

  • Radius1: 小圆盘圆周运动所绕圆环的半径
  • Radius2: 定义环面形状的小圆盘的半径
  • Angle1: 用于切割/定义环面小圆盘的第1个角度参数
  • Angle2: 用于切割/定义环面小圆盘的第2个角度参数
  • Angle3: 用于定义环面运动圆周的第3个角度参数

以及一系列标准定位参数。下图以可视化方式展示了上述提及的诸参数:

将Radius1的值指定为20 mm。

The parameter Radius2 has a value of 2 mm.

The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

The parameter Angle2 has a value of 90°.

The parameter Angle3 has a value of 90°.