零件环面

From FreeCAD Documentation
Revision as of 10:31, 13 July 2019 by Wconly (talk | contribs)

Part Torus

Menu location
Part → Torus
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

描述

根据position, angle1, angle2, angle3, radius1 与 radius2参数创建一个简单的参数化环面。

如何使用

零件工作台中点击环形图标。这会在原点(point 0,0,0)处创建一个环形。 三个角度参数(angle1, angle2, angle3)与两个半径参数(radius1 , radius2)用于确定参数化环形,详情请看下段文字。

选项

参数

A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:

  • Radius1: Radius of the circle around which the disc circulate
  • Radius2: Radius of the disc defining the form of the torus
  • Angle1: 1st angle to cut / define the disc of the torus
  • Angle2: 2nd angle to cut / define the disc of the torus
  • Angle3: 3rd angle to define the circumference of the torus.

as well as the standard set of placement parameters. The pictures below give a visual overview of the parameters antecedently mentioned:

The parameter Radius1 has a value of 20 mm.

The parameter Radius2 has a value of 2 mm.

The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".

The parameter Angle2 has a value of 90°.

The parameter Angle3 has a value of 90°.