零件圆锥

From FreeCAD Documentation
Revision as of 09:47, 13 July 2019 by Wconly (talk | contribs) (Created page with "== 如何使用 == 点击位于零件工作台中的图标32px。")

Part Cone

Menu location
Part → Cone
Workbenches
Part
Default shortcut
None
Introduced in version
-
See also
Part CreatePrimitives

描述

在零件工作台中,可以通过零件工具栏、Part菜单(中的primitives子菜单)或Create Primitives(创建图元)对话框来创建参数化的截断零件圆锥图元。

如何使用

点击位于零件工作台中的图标

The default values create a truncated parametric cone, defined by radius1, radius2 height and angle, parameters. The default cone will be positioned at origin (point 0,0,0) on creation. The angle parameter permits the creation of a portion of cone (it is set to 360° by default), and the radius 1 and 2 correspond to base and top radius of the truncated cone.

Options

Cone

  • Radius 1 - radius of the arc or circle defining the lower face
  • Radius 2 - radius of the arc or circle defining the upper face
  • Height - the height of the Part Cone
  • Angle - the number of degrees of the arc or circles defining the upper and lower faces of the truncated cone. The default 360 creates circular faces, a lower value will create a portion of a cone as defined by upper and lower faces each with edges defined by an arc of the number of degrees and two radii.


The image below shows a Part Cone with the parameter "Angle" set to 270 degrees and all other parameters are at their default values.