Navigation Cube/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(4 intermediate revisions by the same user not shown)
Line 15: Line 15:
Se você estiver olhando para a vista 3D padrão, ela se parece com o seguinte:
Se você estiver olhando para a vista 3D padrão, ela se parece com o seguinte:
</div>
</div>

The Navigation Cube was updated in FreeCAD version 0.20 and the rest of this page describes that version. In FreeCAD version 0.19 the main behavior is the same but some features are missing.


[[File:Navigation_Cube_Example.png]]
[[File:Navigation_Cube_Example.png]]
Line 33: Line 31:
=== Main cube ===
=== Main cube ===


The main cube has 26 faces: 6 square main faces, 12 rectangular edge faces ({{Version|0.20}}), and 8 triangular corner faces. Clicking any of them will reorient the camera so that its direction is perpendicular to the selected face.
The main cube has 26 faces: 6 main faces, 12 rectangular edge faces ({{Version|0.20}}), and 8 corner faces. Clicking any of them reorients the camera so that its direction is perpendicular to the selected face.


<span id="Directional_arrows"></span>
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
== Setas direcionais ==
== Setas direcionais ==
Line 45: Line 44:
=== Reverse view button ===
=== Reverse view button ===


Clicking the round button in the top right corner of the Navigation Cube will rotate the [[3D_view|3D view]] 180 degrees around the vertical axis of the view.
Clicking the round button in the top right corner of the Navigation Cube rotates the [[3D_view|3D view]] 180 degrees around the vertical axis of the view.


<span id="Mini-cube_menu"></span>
<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
== Menu mini-cubo ==
== Menu mini-cubo ==
Line 56: Line 56:


== Customization ==
== Customization ==

=== Move the Navigation Cube ===

<div class="mw-translate-fuzzy">
== Movendo a exibição do cubo de navegação ==
Você pode mover toda a estrutura de controle do cubo de navegação para outro local na tela 3D, pressionando o mouse em qualquer lugar no cubo de navegação principal e arrastando.
A estrutura não começará a se mover até que o ponteiro do mouse tenha passado a borda do cubo de navegação principal.
</div>


=== Preferences ===
=== Preferences ===
Line 71: Line 63:
</div>
</div>


=== Advanced options ===
=== Advanced parameters ===


Some advanced Navigation Cube parameters cannot be changed in the [[Preferences_Editor#Navigation|Preferences Editor]]. These parameters can be set manually in the [[Std_DlgParameter|Parameter editor]].
<div class="mw-translate-fuzzy">

Para uma configuração mais avançada, consulte o '''CubeMenu''' [[External_workbenches/pt-br|Bancadas de trabalho externas]].
To manually set colors:
</div>

# Start the [[Image:Std_DlgParameter.svg|16px]] [[Std_DlgParameter|Parameter editor]].
# In the panel on the left browse to {{MenuCommand|BaseApp → Preferences → NaviCube}}.
# Right-click the panel on the right and select {{MenuCommand|New unsigned item}} from the context menu.
# Enter the name of one of these colors:
#* {{MenuCommand|BaseColor}}: the base color of all elements, the default is {{Value|3806916544}} (hex: {{Value|e2e8efc0}}). This color can be also set in the [[Preferences_Editor#Navigation|Preferences Editor]]. {{Version|0.21}}
#* {{MenuCommand|EmphaseColor}}: the color of the texts and lines, the default depends on the {{MenuCommand|BaseColor}}. It is either black: {{Value|255}} (hex: {{Value|000000ff}}), or white: {{Value|4294967295}} (hex: {{Value|ffffffff}}). {{Version|0.21}}
#* {{MenuCommand|HiliteColor}}: the color used to highlight the faces and buttons, the default is {{Value|2867003391}} (hex: {{Value|aae2ffff}}).
# The color value must be entered as a 32-bit unsigned integer. Translated to the hexadecimal format this integer has the form {{Value|RRGGBBAA}}. Where {{Value|AA}} stands for the alpha channel (a measure for the transparency), and the other three digit pairs stand for red, green and blue. To convert a hexadecimal value to an unsigned integer you can use the [[Python_console|Python console]], enter for example {{Incode|int("323232ff", 16)}}.
# Optionally set more parameters.
# Press the {{Button|Close}} button.

The table below lists the other advanced Navigation Cube parameters that can be set in a similar manner. Use the information from the '''Type''' column to create a correct new item in step 3.

{| class="wikitable"
|-
! Name
! Description
! Type
! Default

|-
| BorderWidth
| The width of the edges of the cube and the borders around the buttons in pixels.
| Float
| 1.1

|-
| ChamferSize
| The size of the edges and corners as a factor of the cube size. Values should be in the 0.05 - 0.18 range.

{{Version|0.21}}
| Float
| 0.12

|-
| FontStretch
| The font width as a percentage of the default width. Use 0 or 100 for the default font width.
| Integer
| 0

|-
| FontWeight
| The font weight. Higher values make the font more bold. The effect may depend on the font. Use 0 for the default font weight.
| Integer
| 0

|-
| FontZoom
| The size of the labels:
* {{Value|FontZoom &#61; 1.0}}: Make the labels as big as possible individually.
* {{Value|0.0 < FontZoom < 1.0}}: Idem but limit the maximum font size.
* {{Value|FontZoom &#61; 0.0}}: Idem but use the same font size for all.
* {{Value|FontZoom < 0.0}}: Use the same font size for all, but scaled down.

{{Version|0.21}}
| Float
| 0.3

|-
| OffsetX
| The offset of the cube in the X direction relative to its corner position in pixels.
| Integer
| 0

|-
| OffsetY
| The offset of the cube in the Y direction relative to its corner position in pixels.
| Integer
| 0

|-
| ShowCS
| Toggles the display of the coordinate system (the X, Y and Z axis indicators).
| Boolean
| true

|-
| TextBottom
| The text on the bottom face of the cube. The default value should be translated.
| String
| BOTTOM

|-
| TextFront
| The text on the front face of the cube. Idem.
| String
| FRONT

|-
| TextLeft
| The text on the left face of the cube. Idem.
| String
| LEFT

|-
| TextRear
| The text on the rear face of the cube. Idem.
| String
| REAR

|-
| TextRight
| The text on the right face of the cube. Idem.
| String
| RIGHT

|-
| TextTop
| The text on the top face of the cube. Idem
| String
| TOP

|}





Latest revision as of 21:11, 11 June 2023

Introduction

O controle do cubo de navegação, ou 'cubo de navegação, é uma ajuda gráfica de interface com o usuário para reorientar a visualização 3D. Por padrão, ele é visível e reside no canto superior direito da tela 3D. Se você estiver olhando para a vista 3D padrão, ela se parece com o seguinte:

O cubo de navegação é composto de várias partes:

  • Setas direcionais
  • Cubo de navegação principal
  • Menu mini-cubo

All parts, except the axis indicators, can be clicked.

Usage

Main cube

The main cube has 26 faces: 6 main faces, 12 rectangular edge faces (introduced in version 0.20), and 8 corner faces. Clicking any of them reorients the camera so that its direction is perpendicular to the selected face.

Setas direcionais

Há seis setas direcionais: quatro setas triangulares, na parte superior, inferior, esquerda e direita; e duas setas curvas, uma de cada lado da seta superior.

Reverse view button

Clicking the round button in the top right corner of the Navigation Cube rotates the 3D view 180 degrees around the vertical axis of the view.

Menu mini-cubo

No canto inferior direito do cubo de navegação está um pequeno cubo. Clicando neste cubo, aparecerá um menu que você pode usar para mudar o tipo de vista (Ortográfica, Perspectiva, Isométrica) e para "Zoom to Fit".

Customization

Preferences

O cubo de navegação é configurável, incluindo o ajuste de seu tamanho: Editar → Preferências... → Tela → Navegação → Cubo de Navegação introduced in version 0.19.

Advanced parameters

Some advanced Navigation Cube parameters cannot be changed in the Preferences Editor. These parameters can be set manually in the Parameter editor.

To manually set colors:

  1. Start the Parameter editor.
  2. In the panel on the left browse to BaseApp → Preferences → NaviCube.
  3. Right-click the panel on the right and select New unsigned item from the context menu.
  4. Enter the name of one of these colors:
    • BaseColor: the base color of all elements, the default is 3806916544 (hex: e2e8efc0). This color can be also set in the Preferences Editor. introduced in version 0.21
    • EmphaseColor: the color of the texts and lines, the default depends on the BaseColor. It is either black: 255 (hex: 000000ff), or white: 4294967295 (hex: ffffffff). introduced in version 0.21
    • HiliteColor: the color used to highlight the faces and buttons, the default is 2867003391 (hex: aae2ffff).
  5. The color value must be entered as a 32-bit unsigned integer. Translated to the hexadecimal format this integer has the form RRGGBBAA. Where AA stands for the alpha channel (a measure for the transparency), and the other three digit pairs stand for red, green and blue. To convert a hexadecimal value to an unsigned integer you can use the Python console, enter for example int("323232ff", 16).
  6. Optionally set more parameters.
  7. Press the Close button.

The table below lists the other advanced Navigation Cube parameters that can be set in a similar manner. Use the information from the Type column to create a correct new item in step 3.

Name Description Type Default
BorderWidth The width of the edges of the cube and the borders around the buttons in pixels. Float 1.1
ChamferSize The size of the edges and corners as a factor of the cube size. Values should be in the 0.05 - 0.18 range.

introduced in version 0.21

Float 0.12
FontStretch The font width as a percentage of the default width. Use 0 or 100 for the default font width. Integer 0
FontWeight The font weight. Higher values make the font more bold. The effect may depend on the font. Use 0 for the default font weight. Integer 0
FontZoom The size of the labels:
  • FontZoom = 1.0: Make the labels as big as possible individually.
  • 0.0 < FontZoom < 1.0: Idem but limit the maximum font size.
  • FontZoom = 0.0: Idem but use the same font size for all.
  • FontZoom < 0.0: Use the same font size for all, but scaled down.

introduced in version 0.21

Float 0.3
OffsetX The offset of the cube in the X direction relative to its corner position in pixels. Integer 0
OffsetY The offset of the cube in the Y direction relative to its corner position in pixels. Integer 0
ShowCS Toggles the display of the coordinate system (the X, Y and Z axis indicators). Boolean true
TextBottom The text on the bottom face of the cube. The default value should be translated. String BOTTOM
TextFront The text on the front face of the cube. Idem. String FRONT
TextLeft The text on the left face of the cube. Idem. String LEFT
TextRear The text on the rear face of the cube. Idem. String REAR
TextRight The text on the right face of the cube. Idem. String RIGHT
TextTop The text on the top face of the cube. Idem String TOP