Image Workbench/pt-br: Difference between revisions

From FreeCAD Documentation
(Created page with "* Assim como a bancada Sketch, uma imagem importada por ser anexada a um dos principais planos XY, XZ ou YZ, e dado um deslocamento positivo ou negativo...")
(Created page with "== Fluxo de trabalho == A maior utilização desta bancada de trabalho é fazer um traçado sobre a imagem, utilizando as ferramentas da bancada Draft ou [...")
Line 23: Line 23:
* A recomendação é ter a imagem importada em uma resolução razoável.
* A recomendação é ter a imagem importada em uma resolução razoável.


== Workflow ==
== Fluxo de trabalho ==
A major use of this workbench is tracing over the image, with the [[Draft Workbench|Draft]] or [[Sketcher Workbench|Sketcher]] tools, in order to generate a solid body based on the contours of the image.
A maior utilização desta bancada de trabalho é fazer um traçado sobre a imagem, utilizando as ferramentas da bancada [[Draft Workbench|Draft]] ou [[Sketcher Workbench|Sketcher]], com o intuito de gerar um sólido baseado nos contornos traçados na imagem.


Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.
Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

Revision as of 23:56, 30 April 2019

Introdução

A bancada Image Workbench controla diferentes tipos de imagens bitmap e permite que você as abra no FreeCAD.

Atualmente, o módulo suporta a abertura de arquivos nos formatos BMP, JPG, PNG e XPM.

Ferramentas

  • Abrir: abre uma imagem em uma nova janela de visualização.
  • Importar para o plano: importa uma imagem para um plano na vista 3D.
  • Escalar: Escala uma imagem importada para um plano.

Recursos

  • Assim como a bancada Sketch, uma imagem importada por ser anexada a um dos principais planos XY, XZ ou YZ, e dado um deslocamento positivo ou negativo.
  • A imagem é importada com uma relação de 1 pixel para 1 milímetro.
  • A recomendação é ter a imagem importada em uma resolução razoável.

Fluxo de trabalho

A maior utilização desta bancada de trabalho é fazer um traçado sobre a imagem, utilizando as ferramentas da bancada Draft ou Sketcher, com o intuito de gerar um sólido baseado nos contornos traçados na imagem.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

Raytracing Module/pt-br
Draft Module/pt-br