Image Workbench/pt-br: Difference between revisions

From FreeCAD Documentation
(Created page with "== Recursos ==")
(Created page with "* Assim como a bancada Sketch, uma imagem importada por ser anexada a um dos principais planos XY, XZ ou YZ, e dado um deslocamento positivo ou negativo...")
Line 19: Line 19:
== Recursos ==
== Recursos ==


* Like a [[Sketcher Workbench|Sketch]], an imported image can be attached to one of the main planes XY, XZ, or YZ, and given a positive or negative offset.
* Assim como a bancada [[Sketcher Workbench|Sketch]], uma imagem importada por ser anexada a um dos principais planos XY, XZ ou YZ, e dado um deslocamento positivo ou negativo.
* The image is imported with relation of 1 pixel to 1 millimeter.
* A imagem é importada com uma relação de 1 pixel para 1 milímetro.
* A recomendação é ter a imagem importada em uma resolução razoável.
* The recommendation is to have the imported image at a reasonable resolution.


== Workflow ==
== Workflow ==

Revision as of 23:51, 30 April 2019

Introdução

A bancada Image Workbench controla diferentes tipos de imagens bitmap e permite que você as abra no FreeCAD.

Atualmente, o módulo suporta a abertura de arquivos nos formatos BMP, JPG, PNG e XPM.

Ferramentas

  • Abrir: abre uma imagem em uma nova janela de visualização.
  • Importar para o plano: importa uma imagem para um plano na vista 3D.
  • Escalar: Escala uma imagem importada para um plano.

Recursos

  • Assim como a bancada Sketch, uma imagem importada por ser anexada a um dos principais planos XY, XZ ou YZ, e dado um deslocamento positivo ou negativo.
  • A imagem é importada com uma relação de 1 pixel para 1 milímetro.
  • A recomendação é ter a imagem importada em uma resolução razoável.

Workflow

A major use of this workbench is tracing over the image, with the Draft or Sketcher tools, in order to generate a solid body based on the contours of the image.

Tracing over an image works best if the image has a small negative offset, for example, -0.1 mm, from the working plane. This means that the image will be slightly behind the plane where you draw your 2D geometry, so you won't draw on the image itself.

The offset of the image can be set during import, or changed later through its properties.

Raytracing Module/pt-br
Draft Module/pt-br