Workbenches/sv: Difference between revisions

From FreeCAD Documentation
(Created page with "'''Inbyggda arbetsbänkar''' * Nät arbetsbänken för arbete med triangulerade nät. * Del arbetsbänken för arbete med CAD del...")
(Created page with "Nya arbetsbänkar är under utveckling, håll utkik!")
Line 21: Line 21:
* Flera test arbetsbänkar. I arbetsbänklistan kommer du att finna flera arbetsbänkar för test av olika arbetsområden och funktioner eftersom FreeCAD fortfarande är i en tidig utvecklingsfas.
* Flera test arbetsbänkar. I arbetsbänklistan kommer du att finna flera arbetsbänkar för test av olika arbetsområden och funktioner eftersom FreeCAD fortfarande är i en tidig utvecklingsfas.


Nya arbetsbänkar är under utveckling, håll utkik!
New workbenches are in development, stay tuned!


When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and eventually other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.
When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and eventually other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.

Revision as of 15:37, 6 December 2013

FreeCAD, som många moderna design applikationer som Revit, är baserade på konceptet Arbetsbänk. En arbetsbänk kan anses vara ett set verktyg, grupperade för en viss uppgift. I en traditionell möbelverkstad, så skulle du ha ett arbetsbord för den person som arbetar med trä, ett annat bord för den som arbetar med metalldelar, och kanske ett tredje för den som monterar ihop allting.

I FreeCAD, så används samma koncept . Verktyg är grupperade i arbetsbänkar i enlighet med de uppgifter de är relaterade till.

För närvarande har vi följande arbetsbänkar:

Inbyggda arbetsbänkar

  • Flera test arbetsbänkar. I arbetsbänklistan kommer du att finna flera arbetsbänkar för test av olika arbetsområden och funktioner eftersom FreeCAD fortfarande är i en tidig utvecklingsfas.

Nya arbetsbänkar är under utveckling, håll utkik!

When you switch from one workbench to another, the tools available on the interface change. Toolbars, command bars and eventually other parts of the interface switch to the new workbench, but the contents of your scene doesn't change. You could, for example, start drawing 2D shapes with the Draft Workbench, then work further on them with the Part Workbench.

Note that sometimes a Workbench is referred to as a Module. However, Workbenches and Modules are different entities. A Module is any extension of FreeCAD, while a Workbench is a special GUI configuration that groups some toolbars and menus. Usually every Module contains its own Workbench, hence the cross-use of the name.

Property editor
PartDesign Workbench