Part: Casetă
Part Box |
Menu location |
---|
Part → Primitives → Cube |
Workbenches |
Part, Complete |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part CreatePrimitives |
Descriere
The Box command from the Part Workbench inserts a parametric, rectangular cuboid, geometric primitive into the active document. By default, the Box command will insert a 10x10x10 mm cube, positioned at the origin, with the label "cube". These parameters may be modified after the object has been added.
Cum se folosește
- Click the cube icon from the Part Workbench.
- Alternatively, you can select Part → Primitives → Cube from the menu bar.
Opțiuni
- Via the Property Editor:
- Length: Set the length distance for your Box object (default is 10 mm).
- Width: Set the width distance for your Box object (default is 10 mm).
- Height: Set the height distance for your Box object (default is 10 mm).
- Placement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- Label: The Label is the name given to the operation. This name can be changed at your convenience.
Proprietăți
Base
- DatePlacement: Specifies the orientation and position of the Box in the 3D space. See Placement. The reference point is the left front lower corner of the box.
- DateLabel: Label given to the Box object. Change to suit your needs.
Box
- DateLength: The length parameter is the Box's dimension in the x-direction.
- DateWidth: The width parameter is the Box's dimension in the y-direction.
- DateHeight: The height parameter is the Box's dimension in the z-direction.
Scripting
Comanda Box poate fi utilizat în macros și din consola python utilizând următoarea funcție:
FreeCAD.ActiveDocument.addObject("Part::Box", "myBox")
- Unde "myBox" este o denumire/etichetă pentru obiectul Box.
- Are ca rezulta obiectul nou creat de tip Box.
Puteți accesa și modifica atributele obiectului Box. De exemplu, ați putea dori să modificați parametrii de lungime, lățime și înălțime.
FreeCAD.ActiveDocument.myBox.Length = 25
FreeCAD.ActiveDocument.myBox.Width = 15
FreeCAD.ActiveDocument.myBox.Height = 30
Puteți schimba amplasamentul cu:
FreeCAD.ActiveDocument.myBox.Placement = FreeCAD.Placement(FreeCAD.Vector(4, 6, 3), FreeCAD.Rotation(30, 45, 10))
FreeCAD - Version
Ăncepând cu versiunea 0.14, Part Box se fâreferă la un element GUI element ca un Cube și denumirea/eticheta implicită este "Cube".