PartDesign Pignon

From FreeCAD Documentation
Revision as of 10:31, 21 May 2021 by David69 (talk | contribs) (Created page with "== Description == Cet outil vous permet de créer un profil 2D d'un pignon. Il peut être extrudé avec la fonction PartDesign Protrusion.")

PartDesign Pignon

Emplacement du menu
Part Design → Sprocket...
Ateliers
PartDesign
Raccourci par défaut
Aucun
Introduit dans la version
0.19
Voir aussi
Aucun

Description

Cet outil vous permet de créer un profil 2D d'un pignon. Il peut être extrudé avec la fonction PartDesign Protrusion.

Usage

  1. Go to the menu Part Design → Sprocket....
  2. Set the DonnéesNumber Of Teeth and the DonnéesSprocket Reference.
  3. Click OK
  4. If the sprocket gear is created outside of the active body, drag and drop it into a body for the application of further features like padding.

Properties

  • DonnéesNumber Of Teeth: Number of teeth
  • DonnéesSprocket Reference: The sprocket type. A list of sprocket definitions. introduced in version 0.20 The list includes ANSI and ISO-norms as well as some bicycle and motorcycle sprocket definitions.
  • DonnéesPitch: Distance between two teeth
  • DonnéesRoller Diameter: Diameter of the chain rollers the sprocket is designed for
  • DonnéesThickness:The principal thickness of the sprocket. Note: The sprocket cannot just be padded with this thickness because the teeth have side chamfers. Therefore look at the sprocket definition to model a valid 3D sprocket. introduced in version 0.20