PartDesign Migrate/es: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/es |Name=PartDesign Migrate |Name/es=DiseñoPiezas Migración |MenuLocation=Diseño Piezas → Migración |Workbenches=DiseñoPiezas |...")
(Created page with "El ambiente de trabajo de DiseñoPiezas en FreeCAD v0.17 introduce nuevas herramientas y elementos que no son reconocidos por las versiones anteriores de FreeCAD (0.16 y anter...")
Line 19: Line 19:
==Descripción==
==Descripción==


El ambiente de trabajo de DiseñoPiezas en FreeCAD v0.17 introduce nuevas herramientas y elementos que no son reconocidos por las versiones anteriores de FreeCAD (0.16 y anteriores). Los documentos de FreeCAD creados en versiones anteriores pueden seguir siendo abiertos y editados. Para beneficiarse de las nuevas características, deben ser migrados a través del menú DiseñoPiezas → Migrar.
The PartDesign workbench in FreeCAD v0.17 introduces new tools and elements that are not recognized by older FreeCAD versions (0.16 and older). FreeCAD documents created in older versions can still be opened and edited. To benefit from the new features, they must be migrated via the menu PartDesign → Migrate.


{{Version|0.17}}
{{Version|0.17}}

Revision as of 11:02, 17 March 2021

DiseñoPiezas Migración

Ubicación en el Menú
Diseño Piezas → Migración
Entornos de trabajo
DiseñoPiezas
Atajo de teclado por defecto
Ninguno
Introducido en versión
0.17
Ver también
Ninguno

Descripción

El ambiente de trabajo de DiseñoPiezas en FreeCAD v0.17 introduce nuevas herramientas y elementos que no son reconocidos por las versiones anteriores de FreeCAD (0.16 y anteriores). Los documentos de FreeCAD creados en versiones anteriores pueden seguir siendo abiertos y editados. Para beneficiarse de las nuevas características, deben ser migrados a través del menú DiseñoPiezas → Migrar.

introduced in version 0.17

Utilización

  1. Open a FreeCAD document that was created with FreeCAD version 0.16 and below
  2. Switch to the PartDesign workbench.
  3. Go to the Part DesignMigrate menu.
  4. If the migration works, a Part container will be created which will hold one or more Bodies, each hosting a chain of features.

Limitaciones

  • Before starting the migration process, check if the model was built with automatic refine options enabled (in Edit → Preferences → Part design → General), and set your preferences accordingly. This can be easily determined by successively toggling the visibility of the features in the Model tree. If no residual edges are left between features such as Pads and Pockets, the automatic refine options were disabled.
  • If a document to migrate only contains sketches and PartDesign features, the migration process may likely succeed. Some features such as chamfers and fillets may require rebuilding.
  • If the document to migrate has a mixed Part/Part Design/Draft workflow, the conversion will most likely fail or at best produce unexpected results, and will need to be migrated manually.