Mouse navigation/sv: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(New template with editable fields so they can be translated in the same page)
Line 68: Line 68:
=== CAD Navigation (default) ===
=== CAD Navigation (default) ===
This is the default navigation style and allows the user a simple control of the view, and does not require the use of keyboard keys except to make multi-selections.
This is the default navigation style and allows the user a simple control of the view, and does not require the use of keyboard keys except to make multi-selections.

{{CAD Navigation}}
{{CAD Navigation
|Select_name=Select
|Pan_name=Pan
|Zoom_name=Zoom
|Rotate_view_name=Rotate view<br>First method
|Rotate_view_alt_name=Rotate view<br>Alternate method
|Ctrl={{KEY|Ctrl}}
|Shift={{KEY|Shift}}
|Select_text=Press the left mouse button over an object you want to select.

Holding down {{KEY|Ctrl}} allows the selection of multiple objects.
|Pan_text=Hold the middle mouse button, then move the pointer.
|Pan_mode_text=Pan mode: hold the {{KEY|Ctrl}} key, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Zoom_text=Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.
|Zoom_mode_text=Zoom mode: hold the {{KEY|Ctrl}} and {{KEY|Shift}} keys, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Rotate_view_text=Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues [[spinning]], if this is enabled.

A double click with the middle mouse button sets a new center of rotation.
|Rotate_view_mode_text=Rotate mode: hold the {{KEY|Shift}} key, press the right mouse button once, then move the pointer. {{Version|0.17}}
|Rotate_view_alt_text=Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.
}}





Revision as of 03:22, 11 December 2018

FreeCAD's musmodell är mycket flexibel och intuitiv och med några tips så kan du använda den redan efter någon minuts träning.

File:Mouse-model.png

FreeCAD's musmodell är mycket flexibel och intuitiv och med några tips så kan du använda den redan efter någon minuts träning.

File:Mouse-model.png

Välja objekt

Objekt kan väljas med ett klick med den vänstra musknappen antingen genom att klicka på objektet i 3D-vyn eller genom att välja den i trädvyn. Det finns även en Förvals mekanism som markerar objekt och visar information om dem bara genom att hålla markören över den. Om du inte gillar det beteendet eller om du har en långsam maskin, så kan du stänga av förval i inställningarna.

Hantera Objekt

Objekthanteringen är gemensam för alla arbetsbänkar. Följande musgester kan användas till att kontrollera objektposition och vy.

Välj
Klicka med den vänstra musknappen över det objekt som du vill välja.
Zoom
Använd + eller - tangenterna eller mushjulet för att zooma in och ut.
Panorera
Klicka med den mittre musknappen och flytta runt objektet .
Rotera
Klicka först med den mittre musknappen, håll den nedtryckt och klicka sedan med den vänstra musknappen på en synlig del av ett objekt och dra den i den önskade riktningen. Detta fungerar som en boll som snurrar runt dess centrum. Om du släpper knapparna innan du stoppar rörelsen, så kommer objektet fortsätta att rotera, om detta är aktiverat.
Ställa in rotationscentrum
Ett dubbelklick med den mittre musknappen på valfri del av objektet ställer in ett nytt roationscentrum och zoomar in på denna punkt.

Manipulera Objekt

FreeCAD har manipulatorer som kan användas till att ändra ett objekt eller dess visuella utseende. Ett enkelt exempel är klippningsplan som kan aktiveras med Visa?Klippningsplan menyn. Efter aktivering så kommer klippningsplan objektet fram och visar sju självklara manipulatorer som små lådor: En på varje ände på dess tre koordinataxlar och en på dentrum på den axel som är normal till planet. Det finns fyra till som inte är så självklara: Själva planet och den tunna delen på de tre axelobjekten.

Skalning
För att skala objektet klicka med den vänstra musknappen på lådmanipulatorerna vid slutet på axlarna och dra dem bakåt och framåt. Beroende på objektet så arbetar manipulatorerna oberoende eller synkront.
Flytta ut ur planet
För att flytta objektet längs dess normalvektor, dra i den långa lådan vid axelns centrum med den vänstra musknappen. För klippningsplanet finns det endast en manipulator längs normalvektorn.
Flytta i planet
För att flytta klippningsplanets centrum, klicka på planobjektet och dra den till den önskade positionen.
Rotation
Klicka på den tunna delen av axlarna sätter manipulatorn i rotationsläge.

The FreeCAD mouse model consists of the commands used to visually navigate the 3D space and interact with the objects displayed. FreeCAD supports multiple mouse model navigation styles. The default navigation style is referred to as "CAD Navigation," and is very simple and practical, but FreeCAD also provides alternative navigation styles, that you can choose according to your preferences.

Hantera Objekt

Objekthanteringen är gemensam för alla arbetsbänkar. Följande musgester kan användas till att kontrollera objektposition och vy.

Välj
Klicka med den vänstra musknappen över det objekt som du vill välja.
Zoom
Använd + eller - tangenterna eller mushjulet för att zooma in och ut.
Panorera
Klicka med den mittre musknappen och flytta runt objektet .
Rotera
Klicka först med den mittre musknappen, håll den nedtryckt och klicka sedan med den vänstra musknappen på en synlig del av ett objekt och dra den i den önskade riktningen. Detta fungerar som en boll som snurrar runt dess centrum. Om du släpper knapparna innan du stoppar rörelsen, så kommer objektet fortsätta att rotera, om detta är aktiverat.
Ställa in rotationscentrum
Ett dubbelklick med den mittre musknappen på valfri del av objektet ställer in ett nytt roationscentrum och zoomar in på denna punkt.

Manipulera Objekt

FreeCAD har manipulatorer som kan användas till att ändra ett objekt eller dess visuella utseende. Ett enkelt exempel är klippningsplan som kan aktiveras med Visa?Klippningsplan menyn. Efter aktivering så kommer klippningsplan objektet fram och visar sju självklara manipulatorer som små lådor: En på varje ände på dess tre koordinataxlar och en på dentrum på den axel som är normal till planet. Det finns fyra till som inte är så självklara: Själva planet och den tunna delen på de tre axelobjekten.

Skalning
För att skala objektet klicka med den vänstra musknappen på lådmanipulatorerna vid slutet på axlarna och dra dem bakåt och framåt. Beroende på objektet så arbetar manipulatorerna oberoende eller synkront.
Flytta ut ur planet
För att flytta objektet längs dess normalvektor, dra i den långa lådan vid axelns centrum med den vänstra musknappen. För klippningsplanet finns det endast en manipulator längs normalvektorn.
Flytta i planet
För att flytta klippningsplanets centrum, klicka på planobjektet och dra den till den önskade positionen.
Rotation
Klicka på den tunna delen av axlarna sätter manipulatorn i rotationsläge.

The FreeCAD mouse model consists of the commands used to visually navigate the 3D space and interact with the objects displayed. FreeCAD supports multiple mouse model navigation styles. The default navigation style is referred to as "CAD Navigation," and is very simple and practical, but FreeCAD also provides alternative navigation styles, that you can choose according to your preferences.

Navigation

The object handling is common to all workbenches. The following mouse gestures can be used to control the object position and view according to which Navigation style is selected.

There are two ways to change the navigation style:

  • In the Preferences Editor, Display section, 3D View tab;
  • By right-clicking in empty space in the 3D view area, then selecting Navigation style in the contextual menu.


CAD Navigation (default)

This is the default navigation style and allows the user a simple control of the view, and does not require the use of keyboard keys except to make multi-selections.

Select Pan Zoom Rotate view
First method
Rotate view
Alternate method
Press the left mouse button over an object you want to select.

Holding down Ctrl allows the selection of multiple objects.

Hold the middle mouse button, then move the pointer. Use the mouse wheel to zoom in and out.

Clicking the middle mouse button re-centers the view on the location of the cursor.

Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.

The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled.

A double click with the middle mouse button sets a new center of rotation.

Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.

With this method the middle mouse button may be released after the right mouse button is held pressed.

Users who use the mouse with their right hand may find this method easier than the first method.

Ctrl+ Ctrl+Shift+ Shift+
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. introduced in version 0.17 Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. introduced in version 0.17 Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer. introduced in version 0.17


OpenInventor Navigation

In OpenInventor (formerly Inventor) Navigation, modeled after Open Inventor (not to be confused with Autodesk Inventor), there is no mouse-only selection. In order to select objects, you must hold down the CTRL key. Template:Inventor Navigation


Blender Navigation

The Blender Navigation was modeled after Blender. Previously there was no mouse-only panning, and it required use of the SHIFT key to pan the view. This changed in 2016 with a feature-addition. In order to pan the view, you can now press both left and right mouse buttons and drag in the view.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}}
{{{Shift}}}+
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}}

Touchpad Navigation

In Touchpad Navigation, neither panning, nor zooming, nor rotating the view, are mouse-only (or touchpad-only) operations.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}}
{{{Shift}}}+ {{{PageUp}}}, {{{PageDown}}} {{{Alt}}}+
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}}
{{{Ctrl}}}+{{{Shift}}}+ {{{Shift}}}+
{{{Zoom_alt_text}}} {{{Rotate_view_alt_text}}}

Gesture Navigation (v0.16)

This navigation style was tailored for usability with touchscreen and pen, but is very usable with mouse too.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}} {{{Tilt_view_name}}}
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}} {{{Tilt_view_text}}}
{{{Select_gesture_text}}} {{{Pan_gesture_text}}} {{{Zoom_gesture_text}}} {{{Rotate_view_gesture_text}}} {{{Tilt_view_gesture_text}}}


Maya-Gesture Navigation

In Maya-Gesture Navigation, all view movements are activated pressing ALT and a mouse button, so that it will be needed to have a 3 button mouse in order to correctly use this navigation mode. Alternately it's possible to use gestures as this mode was been developed over the normal Gesture Navigation mode.

{{{Select_name}}} {{{Pan_name}}} {{{Zoom_name}}} {{{Rotate_view_name}}}
{{{Alt}}}+ {{{Alt}}}+ {{{Alt}}}+
{{{Select_text}}} {{{Pan_text}}} {{{Zoom_text}}} {{{Rotate_view_text}}}

Selecting objects

Simple selection

Objects can be selected by a click with the left mouse button either by clicking on the object in the 3D-view or by selecting it in the tree view.

Preselection

There is also a Preselection mechanism that highlights objects and displays information before selection by just hovering the mouse over the objects. If you don't like this behaviour or you have a slow machine, you can switch preselection off in the preferences.


Manipulating Objects

FreeCAD offers manipulators that are handles that can be used to modify an object's appearance, shape, or other parameters.

The clipping plane is an example of an object with manipulators. A clipping plane can be activated with the View→Clipping Plane menu

Hardware support

FreeCAD also supports some 3D input devices.

Mac OS X Issues

Recently we got reports on the forum from Mac users that those mouse button and key combination do not work as expected. Unfortunately, none of the developers owns a Mac, neither do the other regular contributors. We need your help to determine which mouse buttons and key combination work so we can update this wiki.

Getting started/sv
Document structure/sv