Mouse navigation/es: Difference between revisions
(Updating to match new version of source page) |
m (FuzzyBot moved page Mouse Model/es to Mouse navigation/es without leaving a redirect: Part of translatable page "Mouse Model") |
(No difference)
|
Revision as of 23:06, 23 July 2021
Vista general
El modelo de ratón de FreeCAD consiste en los comandos utilizados para navegar visualmente por el espacio tridimensional e interactuar con los objetos mostrados. Actualmente hay 3 esquemas diferentes de navegación con el ratón en FreeCAD. El estilo de navegación por defecto se denomina "Navegación CAD", y es muy simple y práctico, pero FreeCAD también tiene dos estilos de navegación alternativos modelados según la navegación de Inventor y Blender.
Los gestos del ratón utilizados para la manipulación de objetos varían según el estilo de navegación seleccionado; el estilo seleccionado actualmente se utiliza para todos los bancos de trabajo.
Hay dos formas de cambiar el estilo de navegación:
- En el Editor de Preferencias, sección Display, pestaña Vista 3D;
- Pulsando con el botón derecho en un área vacía de la vista 3D y seleccionando Estilo de navegación en el menú contextual.
Este es el estilo de navegación por defecto y permite al usuario un control simple de la vista, y no requiere el uso del teclado con la excepción de la realización de selecciones múltiples.
Select | Pan | Zoom | Rotate view First method |
Rotate view Alternate method |
---|---|---|---|---|
Press the left mouse button over an object you want to select.
Holding down Ctrl allows the selection of multiple objects. |
Hold the middle mouse button, then move the pointer. | Use the mouse wheel to zoom in and out.
Clicking the middle mouse button re-centers the view on the location of the cursor. |
Hold the middle mouse button, then press and hold the left mouse button, then move the pointer.
The cursor location when the middle mouse button is pressed determines the center of rotation. Rotation works like spinning a ball which rotates around its center. If the buttons are released before you stop the mouse motion, the view continues spinning, if this is enabled. A double click with the middle mouse button sets a new center of rotation. |
Hold the middle mouse button, then press and hold the right mouse button, then move the pointer.
With this method the middle mouse button may be released after the right mouse button is held pressed. Users who use the mouse with their right hand may find this method easier than the first method. |
Ctrl+ | Ctrl+Shift+ | Shift+ | ||
Pan mode: hold the Ctrl key, press the right mouse button once, then move the pointer. introduced in version 0.17 | Zoom mode: hold the Ctrl and Shift keys, press the right mouse button once, then move the pointer. introduced in version 0.17 | Rotate mode: hold the Shift key, press the right mouse button once, then move the pointer. introduced in version 0.17 |
La navegación de OpenInventor (antes Inventor) fue modelada según Open Inventor. Para seleccionar los objetos, debe mantener pulsada la tecla Ctrl.
Este modo no está basado en el Autodesk Inventor.
En la Navegación de Blender, no se puede hacer un encuadre sólo con el ratón. Para hacer un encuadre, debes mantener presionada la tecla SHIFT.
Alternatively, hold both left and right mouse buttons, and then move the pointer. |Zoom_text=Use the mouse wheel to zoom in and out. |Rotate_view_text=Hold the middle mouse button, then move the pointer. }}
En la Navegación Touchpad, ni el barrido, ni el acercamiento, ni la rotación de vista son operaciones exclusivas del ratón (o del touchpad).
This navigation style was tailored for usability with touchscreen and pen, but is very usable with mouse too.
Select | Pan | Zoom | Rotate view | Tilt view | |
---|---|---|---|---|---|
Press the left mouse button over an object you want to select. | Hold the right mouse button, then move the pointer. | Use the mouse wheel to zoom in and out. | Hold the left mouse button, then move the pointer.
In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode. To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard. |
Hold both left and right mouse buttons, and then move the pointer sideways. | |
Tap to select. | Drag with two fingers.
Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button. |
Drag two fingers (pinch) closer or farther apart. | Drag with one finger to rotate.
Hold Alt when in the Sketcher. |
Rotate the imaginary line formed by two touch points.
On v0.18 this method is disabled by default. To enable, go to Edit → Preferences → Display, and untick "Disable touchscreen tilt gesture" checkbox. |
Alternatively, tap and hold, then drag. This simulates the pan with the right mouse button. |Zoom_text=Use the mouse wheel to zoom in and out. |Zoom_gesture_text=Drag two fingers (pinch) closer or farther apart. |Rotate_view_text=Hold the left mouse button, then move the pointer. In Sketcher and other edit modes, this behavior is disabled. Hold Alt when pressing the mouse button to enter rotation mode.
To set the camera's focus point for rotation, click a point with the middle mouse button. Alternatively, aim the cursor at a point and press H on the keyboard. |Rotate_view_gesture_text=Drag with one finger to rotate.
Hold Alt when in the Sketcher. |Tilt_view_text=Hold both left and right mouse buttons, then move the pointer sideways. |Tilt_view_gesture_text=Rotate the imaginary line formed by two touch points.
On v0.18 this method is disabled by default. To enable, go to Edit → Preferences → Display, and untick "Disable touchscreen tilt gesture" checkbox. }}
In Maya-Gesture Navigation, all view movements are activated pressing ALT and a mouse button, so that it will be needed to have a 3 button mouse in order to correctly use this navigation mode. Alternately it's possible to use gestures as this mode was been developed over the normal Gesture Navigation mode.
Alternatively, use the mouse wheel to zoom in and out. |Rotate_view_text=Hold Alt and the left mouse button, then move the pointer. }}
Este estilo fue introducido en la versión 0.18.
OpenCascade
Este estilo fue introducido en la versión 0.18.
Seleccionando objetos
Selección simple
Los objetos pueden seleccionarse mediante un clic con el botón izquierdo del ratón o bien pulsando sobre el objeto en la vista 3D o seleccionándolo en la vista en árbol.
También hay un mecanismo de preselección que resalta los tobjetos y muestra información de ellos antes de seleccionarlos con sólo pasar el ratón sobre ellos. Si no te gusta ese comportamiento o si tienes una máquina lenta, puedes desactivar la opción de preselección en el menú de preferencias.
Manipulación de Objetos
FreeCAD ofrece manipuladores que se pueden utilizar para modificar un objeto o su aspecto visual.
Soporte de Hardware
FreeCAD también soporta algún Dispositivo de entrada 3D.
Problemas en Mac OS X
Recientemente hemos recibido reportes en el foro de usuarios Mac que esas combinaciones de ratón y tecla no funcionan como se espera. Desafortunadamente, ninguno de los desarrolladores posee una Mac, tampoco otros contribuidores regulares. Necesitamos de tu ayuda para determinar que combinaciones de ratón y tecla funcionan para poder actualizar este wiki.
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub