Draft Snap Dimensions/pt-br: Difference between revisions

From FreeCAD Documentation
(Created page with "== Preferências ==")
(Created page with "{{Docnav |Plano de trabalho |Grade de comutação |Draft |IconL=Draft_Snap_WorkingPlane.svg...")
Line 43: Line 43:


{{Docnav
{{Docnav
|[[Draft_Snap_WorkingPlane|Snap WorkingPlane]]
|[[Draft_Snap_WorkingPlane/pt-br|Plano de trabalho]]
|[[Draft_ToggleGrid|ToggleGrid]]
|[[Draft_ToggleGrid/pt-br|Grade de comutação]]
|[[Draft_Module|Draft]]
|[[Draft_Module/pt-br|Draft]]
|IconL=Draft_Snap_WorkingPlane.svg
|IconL=Draft_Snap_WorkingPlane.svg
|IconR=Draft_ToggleGrid.svg
|IconR=Draft_ToggleGrid.svg

Revision as of 16:52, 3 August 2021

Other languages:

Draft Snap Dimensions

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock, Draft SelectPlane

Descrição

The Draft Snap Dimensions option shows temporary X and Y dimensions. They display the X and Y distance between the cursor and the previous point in the working plane coordinate system. The dimensions are created on the working plane.

Temporary dimensions show the position of the cursor

Utilização

For general information about snapping see Draft Snap.

  1. Optionally change the working plane.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap Dimensions is not active do one of the following:
    • Press the button in the Draft Snap toolbar.
    • Press the button in the Draft snap widget.
  4. Choose a Draft or Arch command to create your geometry.
  5. Note that you can also change snap options while a command is active.
  6. Pick a first point. This snap option requires a previous point.
  7. As you move the cursor around temporary dimensions are displayed.

Preferências

See Draft Snap.